Return to search

Application of a High Data Rate Modem (HDRM)

ITC/USA 2008 Conference Proceedings / The Forty-Fourth Annual International Telemetering Conference and Technical Exhibition / October 27-30, 2008 / Town and Country Resort & Convention Center, San Diego, California / A traditional Receiver, Modulator, Bit Synchronizer, Frame Synchronizer and Front-End Processor (FEP) with local RAID storage from numerous satellite ground station equipment providers is typically used to satisfy current needs in mission ground stations. The development of Software Defined Radios (SDRs) with reprogrammable personalities has led to the consolidation of these processing elements, and will become the standard for years to follow. CVG-Avtec Systems, Inc. has been a pioneer in the SDR industry, integrating several ground station functions into a one system solution. Its High Data Rate Modem (HDRM) architecture replaces racks of previous generation equipment, providing greater functionality in a smaller footprint. The Field Programmable Gate Array (FPGA) based HDRM is a one system solution that inputs Intermediate Frequency (IF) data and outputs packetized data over IP for data distribution. These new architectures are capitalizing on the revolution in electronics and networking technologies. This paper will discuss the architecture of the HDRM and how it optimizes ground station data processing in a high-rate environment.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/606209
Date10 1900
CreatorsOrndorff, Tim, Puri, Amit, Smiley, Mike, Connell, John
ContributorsCVG/Avtec Systems, Inc.
PublisherInternational Foundation for Telemetering
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Proceedings
RightsCopyright © held by the author; distribution rights International Foundation for Telemetering
Relationhttp://www.telemetry.org/

Page generated in 0.0021 seconds