Return to search

Simulação experimental da interação vento-chuva / Experimental simulation of the wind-rain interaction

Simultâneas ocorrências da ação combinada de chuva e vento em diferentes tipos de estruturas têm sido observadas ao redor do mundo nos últimos 20 anos. Este mecanismo tem despertado curiosidade aos engenheiros e pesquisadores devido às suas conseqüências nefastas para as edificações. Nestes últimos vinte anos passou-se a procurar uma maneira de simular, o mais fielmente possível, este tipo de ação combinada de chuva e vento. Isto ocorreu devido ao fato de que a busca por soluções dos problemas relacionados à ação combinada de vento e chuva basearem-se em métodos empíricos (tipo tentativa e erro). Este tipo de problema, que aos olhos mais descuidados pode parecer pequeno, pode provocar desde pequenos problemas de infiltração de água em edificações até o comprometimento da vida útil de uma estrutura devido o ataque da água, agente corrosivo. O melhor conhecimento do fenômeno através de ensaios experimentais permitirá a engenheiros a identificação deste tipo de problema já na fase de projeto e conseqüentemente a medida paliativa ao mesmo. Para estudo deste fenômeno foi utilizado um modelo ginásio existente na cidade do Rio de Janeiro, que apresentava problema de penetração de chuva devido à ação combinada de chuva e vento. Foram utilizados dois modelos em escala reduzida do ginásio supracitado. O primeiro modelo, construído em escala 1/150 foi instrumentado com sensores de fio-quente para identificar as características do escoamento sobre a estrutura, e um segundo modelo na escala 1/64, instrumentado com um papel especial sensível a água, onde foram realizados os ensaios combinando a ação de chuva e vento. Os ensaios utilizando o modelo em escala 1/150 foram realizados para ângulos de incidência do vento variando de 15o em 15o. Visando o estudo do comportamento da interação chuva e vento, foram realizados três grupos de ensaios. Num primeiro grupo de ensaios, o modelo foi apenas exposto à chuva e os locais onde existia percolação de água identificados. Após o modelo foi novamente ensaiado, desta vez com a ação combinada de chuva e vento, para duas configurações de dispositivos protetores. A partir da análise dos resultados, pode-se concluir que a simulação experimental do processo de interação vento-chuva é possível, e que mais ensaios são necessários para o entendimento do processo. / Simultaneous occurrences of the combined action of rain and wind in different types of structures have been observed around of the world in the last 20 years. This mechanism has been causing curiosity to engineers and researchers due to their jeopardizing consequences to constructions. In these last twenty years people has been seeking for a way to simulate, the most faithfully possible, this type of combined action of rain and wind. This happened due to the fact that the search for solutions to the problems related to the combined action of wind and rain were based on empirical methods (trial and error type). This kind of problem, that may seem small to the most careless eyes, may cause since small water infiltration problems in buildings, up to the own safety of the structure due to the action of water, a corrosive agent. The better knowledge of the phenomenon through experimental tests will allow engineers the problem identification already in the design phase and consequently a palliative solution to it. For the study of this phenomenon, a model of an existent gymnasium in city of Rio de Janeiro was used. Two reduced scale models of the gymnasium were used. The first model, built in a 1/150 scale was instrumented with hot-wire probes to identify the flow characteristics, and the second model, in the scale 1/64, was instrumented with a special water sensitive paper, where the tests were accomplished combining the rain and wind action. The tests for the model in scale 1/150 were performed for wind incidences intervals of 15o. With the aim of study the behavior of the wind-rain interaction, three groups of tests were performed. After that, the model was again tested for two configurations of protective devices. From the analysis of the results, it is possible to conclude that the experimental simulation of the wind-rain interaction process is possible, and that more tests are necessary to understand the process.

Identiferoai:union.ndltd.org:IBICT/oai:www.lume.ufrgs.br:10183/60646
Date January 2010
CreatorsRupp, Henrique Luiz
ContributorsLoredo-Souza, Acir Mércio
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0023 seconds