To improve the wire bondability, interfacial adhesion and popcorn cracking resistance in the packaging processing of IC and MEMS chips, this thesis utilized oxygen and helium plasmas to modify and clean the surface of metal pads. The influences of the plasma cleaning time, metal pad materials and wire bonding time/temperature/power on the strength of wire bonding were investigated.
Two different wire materials (Al wire with 32 £gm in diameter and Au wire with 25 £gm in diameter) were bonded on the surface of Al, Au and Pt metal pads using a commercial ultrasonic wire bonder (SPB-U688), respectively. The pull strength detection of the implemented micro joints is characterized by an accurate pull strength testing system (Dage SERIES-4000).
Based on hundred measurement results, this research has three conclusions described as follows. (I) The pull strength of Au pad is higher than that of Al and Pt pads no matter with the plasma cleaning process or not. The maximum pull strength (12.286 g) can be achieved as the surface of Au pad was modified by the helium plasma for 180 seconds. (II) Helium plasma cleaned wafer can obtain larger improvement of pull strength than that of the oxygen plasma under the same plasma time. However, this result can not be concluded in Al and Pt pads. (III) The optimized wire bonding time/power of the Au, Al and Pt pads are 0.07 s/2.1, 0.05 s/0.6 W and 0.03 s/2.7 W, respectively.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0910108-125647 |
Date | 10 September 2008 |
Creators | Huang, Han-Peng |
Contributors | Wei-Leun Fang, I-Yu Huang, Yu-Cheng Lin, Jin-Chern Chiou, Ruey-Shing Huang |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0910108-125647 |
Rights | campus_withheld, Copyright information available at source archive |
Page generated in 0.1718 seconds