The fabrication of zone plate lenses that are used for focusing X-rays relies on nanofabrication techniques such as e-beam lithography, reactive ion etching, and electroplating. The circular grating-like zone plate pattern can have a smallest half-period, a so-called zone width, of down to 20 nm while it also needs to have a height that is 5 to 10 times the zone width to have good diffraction efficiency. This high aspect ratio structuring is a very challenging field of nanofabrication. This diploma project has focused on improving the process step of fabricating the electroplating mold by cryo-cooling the polymer during the reactive ion etching with O2. The low temperature causes passivation of the sidewalls of the mold during etching which results in a more ideal rectangular profile of the high aspect ratio plating mold. By etching at -100 °C, structures with highly vertical sidewalls and no undercut were realized. The experiments showed that there is a tradeoff between the anisotropy of the zone profile and the formation rate of polymer residue, so-called RIE grass. Through a proper choice of process parameters the grass could be completely removed without introducing any undercut. / QC 20100414
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-12109 |
| Date | January 2010 |
| Creators | Larsson, Daniel |
| Publisher | KTH, Tillämpad fysik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/masterThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Trita-FYS, 0280-316X ; 2010:09 |
Page generated in 0.0023 seconds