Return to search

Rolling tines – evaluation and simulation using discrete element method

The objectives of the study were to evaluate the soil disturbances and manure dispersion created by the AerWay aerator in a silt loam soil; and to generate a calibrated and validated soil-tool model using Discrete Element Methods (DEM) that simulate the draft and vertical forces of the aerator. The experimental results showed that a trend indicated that the faster tractor speeds would disturb more soil. After one hour with the manure application rate of 42 000 L/ha, manure was spread to a depth of 250 mm, 200 mm in the forward direction and 100 mm in the lateral direction. The model draft forces had a relative error of 13.4-31.2% when compared to the literature data between 100-150 mm depth while the predicted vertical force was found to linearly increase until 150 mm depth at around 700 N per rolling tine and plateaus until the full insertion of 200 mm.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:MWU.1993/4805
Date31 August 2011
CreatorsMak, Jay
ContributorsChen, Ying (Biosystems Engineering), Tachie, Mark (Mechanical and Manufacturing Engineering) McLaughlin, Neil (Agriculture and Agri-Food Canada)
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
Detected LanguageEnglish

Page generated in 0.0021 seconds