Mining engineers are tasked with ensuring that underground mining operations be both safe and efficiently productive. Induced stress in deep mines has a significant role in the stability of the underground mines and hence the safety of the mining workplace because the behavior of the rock mass associated with mining-induced seismicity is poorly-understood. Passive seismic tomography is a tool with which the performance of a rock mass can be monitored in a timely manner. Using the tool of passive seismic tomography, the advance rate of operation and mining designs can be updated considering the induced stress level in the abutting rock. Most of our current understanding of rock mass behavior associated with mining-induced seismicity comes from numerical modeling and a limited set of case studies. Therefore, it is critical to continuously monitor the rock mass performance under induced stress. Underground stress changes directly influence the seismic wave velocity of the rock mass, which can be measured by passive seismic tomography. The precise rock mass seismicity can be modeled based on the data recorded by seismic sensors such as geophones of an in-mine microseismic system. The seismic velocity of rock mass, which refers to the propagated P-wave velocity, varies associated with the occurrence of major seismic events (defined as having a local moment magnitude between 2 to 4). Seismic velocity changes in affected areas can be measured before and after a major seismic event in order to determine the highly stressed zones. This study evaluates the seismic velocity trends associated with five major seismic events with moment magnitude of 1.4 at a deep narrow-vein mine in order to recognize reasonable patterns correlated to induced stress redistribution. This pattern may allow recognizing areas and times which are prone to occurrence of a major seismic event and helpful in taking appropriate actions in order to mitigate the risk such as evacuation of the area in abrupt cases and changing the aggressive mine plans in gradual cases. In other words, the high stress zones can be distinguished at their early stage and correspondingly optimizing the mining practices to prevent progression of high stress zones which can be ended to a rock failure. For this purpose a block cave mine was synthetically modeled and numerically analyzed in order to evaluate the capability of the passive seismic tomography in determining the induced stress changes through seismic velocity measurement in block cave mines. Next the same method is used for a narrow vein mine as a case study to determine the velocity patterns corresponding to each major seismic event. / Doctor of Philosophy / Mining activities unbalance the stress distribution underground, which is called mining induced stress. The stability of the underground mines is jeopardized due to accumulation of induced stress thus it is critical for the safety of the miners to prevent excessive induced stress accumulation. Hence it is important to continuously monitor the rock mass performance under the induced stress which can form cracks or slide along the existing discontinuities in rock mass. Cracking or sliding releases energy as the source of the seismic wave propagation in underground rocks, known as a seismic event. The velocity of seismic wave propagation can be recorded and monitored by installing seismic sensors such as geophones underground. The seismic events are similar to earthquakes but on a much smaller scale. The strength of seismic events is measured on a scale of moment magnitude. The strongest earthquakes in the world are around magnitude 9, most destructive earthquakes are magnitude 7 or higher, and earthquakes below magnitude 5 generally do not cause significant damage. The moment magnitude of mining induced seismic events is typically less than 3.
In order to monitor mining induced stress variations, the propagated seismic wave velocity in rock mass is measured by a series of mathematical computations on recorded seismic waves called passive seismic tomography, which is similar to the medical CT-scan machine. Seismic wave velocity is like the velocity of the vibrating particles of rock due to the released energy from a seismic event. This study proposes to investigate trends of seismic velocity variations before and after each seismic event. The areas which are highly stressed have higher seismic velocities compared to the average seismic velocity of the entire area. Therefore, early recognition of highly stressed zones, based on the seismic velocity amount prior the occurrence of major seismic events, will be helpful to apply optimization of mining practices to prevent progression of high stress zones which can be ended to rock failures. For this purpose, time-dependent seismic velocity of a synthetic mine was compared to its stress numerically. Then, the seismic data of a narrow vein mine is evaluated to determine the seismic velocity trends prior to the occurrence of at least five major seismic events as the case study.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/97890 |
| Date | 22 April 2020 |
| Creators | Ghaychi Afrouz, Setareh |
| Contributors | Mining Engineering, Westman, Erik C., Karfakis, Mario G., Chapman, Martin C., Luxbacher, Kramer Davis |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.016 seconds