Return to search

Separação gravitacional de gás em um duto anular inclinado: estudo experimental e modelagem fenomenológica / Gravitational gas separation in an inclined annular channel: experimental study and phenomenological modeling

O presente trabalho apresenta um estudo associado à separação de gás para escoamento gás-líquido em um duto anular inclinado. Esse tipo de escoamento e geometria são encontrados em separadores de gás do tipo shroud invertido na indústria de petróleo quando utilizadas técnicas de bombeamento para a exploração de poços. A presença de gás livre a montante da bomba é uma das maiores limitações dos sistemas de bombeamento, por acarretar cavitação e falhas dinâmicas nos equipamentos. O presente estudo tem por objetivo garantir a separação total de gás livre a montante da bomba através da proposição de um separador do tipo shroud invertido em tubulação inclinada para aplicação na exploração de petróleo em poços direcionais. Um estudo experimental com ar e água como fluidos de trabalho a pressão quase atmosférica foi desenvolvido visando a compreensão da fenomenologia do separador shroud invertido. Foram observados escoamentos em duto anular do tipo: bifásico gás-líquido ascendente, monofásico em canal livre e bifásico gás-líquido descendente devido ao fenômeno de aeração; foram coletados também dados de eficiência de separação em função do ângulo de inclinação, vazão do líquido e queda de pressão entre o shroud e a saída do tubo de produção. Encontrou-se uma variável de extrema importância no fenômeno de separação até agora não reportada na literatura: o nível do anular interno do shroud (NAI). Um modelo fenomenológico que prevê a separação total do gás foi desenvolvido a partir da interpretação dos fenômenos físicos observados experimentalmente. Uma correlação inédita para a modelagem do fenômeno de dissipação de energia cinética turbulenta vinculado à separação do gás é proposta. O modelo foi validado qualitativamente com dados da literatura e ajustado com os dados coletados neste trabalho, mostrando boa concordância. / This paper presents a study associated with gas separation in an inclined gas-liquid annular-duct flow. This type of flow and geometry are found in shroud-inverted gas separators applied to petroleum industries when using pumping technique for oil production. High void fraction at the pump suction of is one of the most important limitations of the SCP technique, causing cavitation and dynamics failures in the equipment. The present study aims to provide a solution for the total gas separation through the use of an innovative inclined inverted-shroud separator for directional wells. An experimental study, where air and water at near atmospheric pressure constituted the working fluids, was carried out to understand the phenomenology of the inclined inverted-shroud separator. Different annular-duct flows were observed: upward gas-liquid flow, single-phase open channel flow, downward gas-liquid flow due to the phenomenon of aeration; also new data of separation efficiency were collected as a function of inclination angle, liquid flow rate and pressure drop between the shroud and production pipe outlet. One of the most significant findings is that the liquid level of the inner annular channel (NAI) of the shroud is a very important variable in the phenomenon of separation; so far this was not reported in the literature. Based on the observations, a phenomenological model that predicts total gas separation is proposed. A new correlation for the modeling of the dissipation of turbulent kinetic energy associated with the gas separation is presented. The model was qualitatively compared with available data from the literature and quantitatively adjusted against the new experimental data obtained in this work, and the agreement was quite good.

Identiferoai:union.ndltd.org:IBICT/oai:teses.usp.br:tde-08062010-143118
Date22 April 2010
CreatorsLuis Enrique Ortiz Vidal
ContributorsOscar Mauricio Hernandez Rodriguez, Valdir Estevam, Paulo Seleghim Junior
PublisherUniversidade de São Paulo, Engenharia Mecânica, USP, BR
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Sourcereponame:Biblioteca Digital de Teses e Dissertações da USP, instname:Universidade de São Paulo, instacron:USP
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.007 seconds