Deltastream is an on-going project carried by Tidal Energy Limited since almost
twenty years. It is a tidal energy converter with a triangular shape and one
turbine on each tower. It has gone through many evolutions of design but a first
prototype will be installed in the end of 2014 at Ramsey Sound.
The deployment and recovery operations will be carried out with a single lift
point through a heavy lift frame. Two issues have to be tackled during the
operation: the rate of flooding of the ballasts and the tension on the lift crane
cable. The most favourable sea state must be found in order to minimise the
crane cable tension as well as the best inlets and outlets configuration for the
ballasts system.
In order to tackle those issues, preliminary analytical work was conducted on
the demonstrator to assess the stability during the flooding process. A scaled
model was designed and built in order to be tested in a wave-towing tank.
The results from the tests highlight that the deployment and the recovery
operations are safe for both the barge and Deltastream for the range of wave
conditions tested in the tank. However, the sea state has an important impact
on the proceeding of the operations, especially the period of the waves.
| Identifer | oai:union.ndltd.org:CRANFIELD1/oai:dspace.lib.cranfield.ac.uk:1826/9206 |
| Date | 09 1900 |
| Creators | Rocolle, Guillaume |
| Contributors | Trarieux, F. |
| Publisher | Cranfield University |
| Source Sets | CRANFIELD1 |
| Language | English |
| Detected Language | English |
| Type | Thesis or dissertation, Masters, MSc by Research |
| Rights | © Cranfield University 2014. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright owner. |
Page generated in 0.0018 seconds