This thesis aims at securing the quality of components from AP&T’s suppliers and to get a picture of different suppliers’ processes. In this thesis, samples supplied by various AP&T suppliers where measured at AP&T to gather data on how well the parts met design specifications. The collected data were analyzed using histogram and stratification. Further analysis was done using pareto chart and capability indices. Only the critical dimensions identified from the pareto chart together with discussions with experts on the shop floor were further analyzed using capability indices. This was done to focus more on the critical dimensions which needed more attention. The findings were critically studied and suggestions were made which served as a fundamental base for supplier product quality improvement plan at AP&T. However, there was no direct contact with the supplier process to ascertain its being in control; therefore, product characterization was carried out. In this case, all the results obtained from the analyses only gave a momentary picture of the process. Therefore, the results can not be used for future predictions.In the analysis, special attention was laid on the shape, spread and centering of the histogram. Studies were also done on the significant few; got from the pareto chart. Use was made of capability indices to get the momentary fall-outs of ppm and the percentage of the specification band used up by the process. / Uppsatsnivå: D
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hb-18884 |
| Date | January 2008 |
| Creators | Yah, Fritz Alum, Che, Jian |
| Publisher | Högskolan i Borås, Institutionen Ingenjörshögskolan, Högskolan i Borås, Institutionen Ingenjörshögskolan, University of Borås/School of Engineering |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Magisteruppsats, |
Page generated in 0.0022 seconds