The wear process in three-body contact causes problems of abrasion such as volume loss and changes of geometry of the triboelements. The wear problem leads to increased failure and high costs for repairing or replacing equipment. To understand the nature of the wear behaviour and to predict the wear rate in advance, experimental investigation and numerical simulation of the wear process are required.
In this work, the wear process is analysed and the influencing parameters governing the wear behaviour are investigated experimentally to develop a new wear model. Main influential factors are considered such as kinematics of abrasive particles, contact stiffness of the particle layer, friction characteristics, and wear factors. The experiments to study kinematics of particle layers are performed on a new observation tester. To define the contact stiffness of abrasive particles, experiments are conducted by the uniaxial spindle compression tester. Moreover, a tribometer test rig with applied load up to 200 N and velocity up to 1000 mm/s is used to investigate the friction characteristics and the wear behaviour of three-body tribosystem.
Analyses of influential factors on the wear behaviour in dependency of predefined process parameter are carried out. Additionally, based on the results of the experimental investigations, approximation equations representing the relation of the influential factors and the process parameters are determined. A three-body wear model is build up to represent the wear behaviour by physical wear laws. Furthermore, these approximation equations and the relevant parameters obtained by experimental investigations are included in the Fleischer’s wear equation to simulate the wear process.
With the coupled model the wear process of the sample can be simulated twodimensional over the sliding distance. It is possible to predict the wear depth and the wear intensity, which can be used to estimate the wear rate. Additionally, from the results of the wear simulation the worn surface and the local contact pressure in the contact region are determined which provide a deeper insight into the wear process.
With this simulation the understanding of the wear behaviour can be improved which is important to solve wear problems.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:105-qucosa-158239 |
| Date | 08 January 2015 |
| Creators | Doan, Yen The |
| Contributors | TU Bergakademie Freiberg, Maschinenbau, Verfahrens- und Energietechnik, Prof. Dr.-Ing. Matthias Kröger, Prof. Dr.-Ing. Matthias Kröger, Prof. Dr.-Ing. Holger Lieberwirth |
| Publisher | Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola" |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:doctoralThesis |
| Format | application/pdf |
Page generated in 0.002 seconds