Return to search

Investigation of Thermal Performance of Cylindrical Heatpipes Operated with Nanofluids

Nanofluids as an innovative class of heat transfer fluids created by dispersing nanometre-sizedmetallic or non-metallic particles in conventional heat transfer fluids displayed the potential toimprove the thermophysical properties of the heat transfer fluids. The main purpose of this study is toinvestigate the influence of the use of nanofluids on two-phase heat transfer, particularly on thethermal performance of the heat pipes. In the first stage, the properties of the nanofluids were studied,then, these nanofluids were used as the working fluids of the heat pipes. The thermal performance ofthe heat pipes when using different nanofluids was investigated under different operating conditionsexperimentally and analytically. The influences of the concentration of the nanofluids, inclinationangles and heat loads on the thermal performance and maximum heat flux of the heat pipes wereinvestigated.This study shows that the thermal performance of the heat pipes depends not only on thermophysicalproperties of the nanofluids but also on the characteristics of the wick structure through forming aporous coated layer on the heated surface. Forming the porous layer on the surface of the wick at theevaporator section increases the wettability and capillarity and also the heat transfer area at theevaporator of the heat pipes.The thermal performance of the heat pipes increases with increasing particle concentration in all cases,except for the heat pipe using 10 wt.% water/Al2O3 nanofluid. For the inclined heat pipe, irrespectiveof the type of the fluid used as the working fluid, the thermal resistance of the inclined heat pipes waslower than that of the heat pipes in a horizontal state, and the best performance was observed at theinclination angle of 60o, which is in agreement with the results reported in the literature. Otheradvantages of the use of nanofluids as the working fluids of the heat pipes which were investigated inthis study were the increase of the maximum heat flux and also the reduction of the entropy generationof the heat pipes when using a nanofluid.These findings revealed the potential for nanofluids to be used instead of conventional fluids as theworking fluid of the heat pipes, but the commercialization of the heat pipes using nanofluids for largescale industrial applications is still a challenging question, as there are many parameters related to thenanofluids which are not well understood. / <p>QC 20170228</p>

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-202566
Date January 2017
CreatorsGhanbarpourgeravi, Morteza
PublisherKTH, Skolan för industriell teknik och management (ITM), Stockholm
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTRITA-REFR, 1102-0245 ; 17/01

Page generated in 0.0022 seconds