Different factors such as growing environmental awareness due to the increasing negative impact of persistent plastic wastes, the uncontrollable price variations of the raw material and the rapid depletion of reserves have increased the interest in research regarding polymers derived from renewable sources to replace petroleum-based materials. One of the earth’s most abundant macromolecules is cellulose. The production of cellulose from another resource replaces and reduces the demand from plants, the other resource being cellulose from a bacterial system. Bcaterial cellulose film were produced by fermenting apple waste (apple pomace) from cider production donated by Herrljunga Cider in Herrljunga, Sweden and expired fruit juice, produced by LoveJuice Indonesia, containing a mixture of fruits, mainly apple. As inoculum for the fermentations two different Kombucha cultures were used. To optimize the fermentation conditions, factors such as nitrogen source, sugar content, temperature, pH, surface area, sterilization of the substrate, culture condition and fermentation time was varied to obtain the desired result. The bacterial cellulose films were dried at 50-70 °C in an oven, air-dried or freeze-dried to evaluate the impact of drying technique on the final material. The behavior of the microorganism during fermentation was monitored by sampling and observation. The consumption rate of carbohydrates was analyzed using high performance liquid chromatography (HPLC). The properties of the obtained biofilms were analyzed using thermogravimetric analysis (TGA), tensile testing and determination of cellulose content in the obtained biofilms. Two different sugar concentrations (35 g/l and 70 g/l) and three different caffeine concentrations (0 g/l, 150 g/l and 225 g/l) as nitrogen source were investigated to determine the best condition. A control batch of conventional (black tea and 70 g/l table sugar) Kombucha was used as reference. The highest tensile strength (50 MPa) and thermal stability was observed in the biofilms with the highest yield that had been dried in oven. The biofilms obtained by fermenting apple pomace from the cider industry showed the highest tensile strength and highest thermal stability in comparison to fermenting expired fruit juice. The biofilm obtained by fermenting apple waste(sugar concentration 70 g/l) in combination with sterilizing the substrate without adding any nitrogen source, dried in an oven and purified using 0,1 M NaOH resulted in the highest tensile strength, highest thermal stability and the purest biofilm from a visual aspect. The highest yield was observed in the fermentation of apple pomace (sugar concentration 70 g/l) from the cider industry without sterilization of the initial media with an addition of nitrogen of approximately 450 mg/l). The optimal fermentation period was observed to be 14-15 days, at 25-28 °C under static conditions using a glass vessel with a diameter of 20 cm and an initial pH of 5,5.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hb-23293 |
| Date | January 2019 |
| Creators | Johansson, Matilda |
| Publisher | Högskolan i Borås, Akademin för textil, teknik och ekonomi |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0024 seconds