The aim of this study is to implement the model predictive control in order to optimally
control the power output of a Brayton cycle based power plant. Other control strategies
have been tried but there still exists the need for better performance. In real systems, a
number of constraints exist. Incorporating these into the control design is no trivial task.
Unlike in most control strategies, model predictive control allows the designer to explicitly
incorporate constraints in its formulation. The original design of the PBMR power plant is
considered. It uses helium gas as the working fluid. The power output of the system can be
controlled by manipulating the helium inventory to the gas cycle.
A linear model of the power plant, modelled in Simulink® is used. This linear model is used
as an evaluation platform for the control strategy. The helium inventory is manipulated by
means of actuators which use values generated by the controller. The controller computes
these values by minimizing the cost of future outputs over a finite horizon in the presence of
constraints.
The dynamic response of the system is used to tune the controller. The power output
performance at different configurations of the controller under perfect conditions and with
disturbances is examined. The best configuration is used resulting in an optimal power
control system for the Brayton cycle based power plant.
Results showed that the method employed can be used to implement the control strategy.
Furthermore, better performance can be realised with model predictive control. / Thesis (M.Ing. (Electrical and Electronic Engineering))--North-West University, Potchefstroom Campus, 2012
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nwu/oai:dspace.nwu.ac.za:10394/11090 |
| Date | January 2012 |
| Creators | Lusanga, Peter Kabanda |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds