Published Article / This paper discusses the results obtained from studies on the performance of different cooling layouts. The conventional method of cooling makes use of straight-line cooling channels. This simple method of cooling does not possess the capability of uniformly cooling down the part produced. In contrast, conformal cooling is a technique that makes use of cooling channels in an injection moulding tool that closely follows the geometry of the part to be produced. The paper presents some experiences gained in a comparative case study of conventional cooling vs conformal cooling using simulation, followed by an experimental validation and statistical analysis of the results.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:cut/oai:ir.cut.ac.za:11462/548 |
| Date | January 2010 |
| Creators | Dimitrov, D., Moammer, A |
| Contributors | Central University of Technology, Free State, Bloemfontein |
| Publisher | Journal for New Generation Sciences, Vol 8, Issue 1: Central University of Technology, Free State, Bloemfontein |
| Source Sets | South African National ETD Portal |
| Language | en_US |
| Detected Language | English |
| Type | Article |
| Format | 2 707 841 bytes, 1 file, Application/PDF |
| Rights | Central University of Technology, Free State, Bloemfontein |
| Relation | Journal for New Generation Sciences;Vol 8, Issue 1 |
Page generated in 0.0023 seconds