<p>From idea generation to conceptualization and development of products and technologies is a non-linear and iterative process. The work in this thesis follows a process that initiates with the review of existing technologies and products, examining their unique value proposition in the context of the specific applications for which they are designed. Next, the unmet needs of novel or emerging applications are identified that require new product or technologies. Once these user needs and product requirements are identified, the specific functions to be addressed by the product are specified. The subsequent process of design of products and technologies to meet these functions is enabled by engineering tools such as three-dimensional modelling, physics-based simulations, and manufacturing of a minimum viable prototype. In these steps, un-biased decisions have to be taken using weighted decision matrices to cater to the design requirements. Finally, the minimum viable prototype is tested to demonstrate the principal functionalities. The results obtained from the testing process identify the potential future improvements in the next generations of the prototype that would subsequently inform the final design of product. This thesis adopted this methodology to initiate the design two product-prototypes: i) an image-recognition-integrated service (IRIS) robotic hand for children and ii) cascaded multi-core vapor chamber (CMVC) for improving performance of next-generation computing systems. Minimum viable product-prototypes were manufactured to demonstrate the principal functionalities, followed by clear identification of future potential improvements. Tests of the prosthetic hand indicate that the image-recognition based feedback can successfully drive the actuators to perform the intended grasping motions. Experimental testing with the multi-core vapor chamber demonstrates successful performance of the prototype, which offers notable reduction in temperatures relative to the existing benchmark solid copper spreader. </p>
Identifer | oai:union.ndltd.org:purdue.edu/oai:figshare.com:article/20399703 |
Date | 29 July 2022 |
Creators | Soumya Bandyopadhyay (13171827) |
Source Sets | Purdue University |
Detected Language | English |
Type | Text, Thesis |
Rights | CC BY 4.0 |
Relation | https://figshare.com/articles/thesis/PRODUCT-APPLICATION_FIT_CONCEPTUALIZATION_AND_DESIGN_OF_TECHNOLOGIES_PROSTHETIC_HAND_TO_MULTI-CORE_VAPOR_CHAMBERS/20399703 |
Page generated in 0.0017 seconds