Tailings is leftover material from mining industry and is produced in huge quantities approximately 70-99% of the ore production. Tailings material is stored as impoundments by constructing tailings dams which are often constructed with tailings material itself. Tailings are artificial material and the mechanical behavior of tailings material upon loading is different as compared to natural soil materials. There are number of dam failures reported every year which has severe impact on inhabitants and environment nearby. Considering the failures of tailings dams and consequences there is a need to understand the tailings material in depth for safe existence of these dams. The confident dam design can assure the safe existence of tailings dams for long term as these dams are presumed to function for generations to come. The material properties in tailings dams can change during operation due to raising of new layer. Raised new layer can change stress level, which in turn may change the material properties in terms of strength, pore pressures, grain sizes etc. Today mostly tailings dam are designed by performing analysis for safety for existing and future rasings as well. These analyses are based upon a for certain factor of safety. Not very much can be done with design and analysis for tailings material if the material is not described very well. Understanding of tailings material in depth can provide help for detailed material parameters which later can be used in safety assessment for future raising and changed conditions in dam. This study presents the work carried out on tailings material from a Swedish tailings dam. The study is conducted on undisturbed and disturbed tailings material. The undisturbed tests are carried out to understand material properties as per in-situ conditions. Whereas disturbed materials are used to created different materials with different particles sizes. Initially in this study the basic properties of tailings materials are studied e.g. specific gravity, phase relationships, particle sizes, particle shapes and shear behavior on collected samples at various depths. During direct shear tests, the unexpected vertical height reductions were observed, these results are presented in this study. The comparison of strength parameters by direct shear and triaxial tests on material from various depths is also done and presented. Based on results from direct shear, triaxial and oedometer tests on uniform sized tailings material; the evaluation of primary and secondary deformations and particle breakage and effect of vertical loads is also carried out and presented. The study also includes the comparison of strength parameters for each particles size. The breakage of particles is analyzed by sieving the material after direct shear tests followed by a particle shape study. The effect of deposition on shear strength parameters is also studied by construction of samples with different angle of deposition of material. The strength parameters of uniform sized particles in triaxial tests are also evaluated and discussed.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-62534 |
| Date | January 2017 |
| Creators | Bhanbhro, Riaz |
| Publisher | Luleå tekniska universitet, Geoteknologi, Luleå |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, 1402-1544 |
Page generated in 0.0022 seconds