To meet the continuously increasing goals in vehicle fuel efficiency, a number of measures are taken in automotive powertrain engineering, such as the combination of electric drives and conventional combustion engines in hybrid vehicles or the increase in gear ratios. This development leads to more complex powertrain systems, such as automatic transmissions. At the same time, the need for complex control systems is increased to achieve this desired functionality.
Automatic transmissions are controlled by an electro-hydraulic control unit that governs all operations such as gear shifting and starting. Since most of the control software is designed in the form of open-loop control, most of the operations have to be calibrated manually. Thus, there exists a large number of calibration parameters in the control software that have to be tuned individually for each combination of engine, transmission and vehicle model. This process is therefore time-consuming and costly. Hence, it would be advantageous to reduce the need for calibration and in the end shorten the development process for automatic transmissions by reducing software complexity while maintaining functionality and performance.
The goal of this thesis is to replace parts of the control software responsible for conducting the gearshifts that require extensive tuning by implementing control systems that have no need for calibration: adaptive high-gain λ-tracking controllers. In order to obtain the control parameters, i.e., the feedback gains, without calibration, an adaption law is implemented that continuously computes these parameters during operation of the controller. Thus, calibration is no longer needed. Since the system has to be high-gain-stabilizable, an extensive system analysis is conducted to determine whether an adaptive λ-tracking controller can be implemented. A nonlinear model of the clutch system dynamics is formulated and investigated.
As a result, high-gain stability is proven for the system class and validated in simulation. Following the stability analysis, the devised adaptive controller is implemented into the control software running on the series production transmission control unit. Extensive simulations with a comprehensive vehicle model running the extended transmission software are conducted to design and to test the adaptive controllers and their underlying parameters during transmission operation in order to evaluate the control performance. The control software containing the adaptive controller is then implemented in two distinct vehicles with different automatic transmissions equipped with series production control hardware for the purpose of hardware experiments and validation. The resulting reduction of calibration efforts is discussed.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:28592 |
| Date | 14 November 2014 |
| Creators | Loepelmann, Peter |
| Contributors | Bäker, Bernard, Reuss, Hans-Christian, Technische Universität Dresden |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:doctoralThesis, info:eu-repo/semantics/doctoralThesis, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0011 seconds