Return to search

Development of laser ultrasonic and interferometric inspection system for high-volume on-line inspection of microelectronic devices

The objectives of this thesis are to develop and validate laser ultrasonic inspection methods for on-line testing of microelectronic devices. Electronic packaging technologies such as flip chips and BGAs utilize solder bumps as electrical and mechanical connections. Since they are located hidden from view between the device and the substrate, defects such as cracks, voids, misalignments, and missing bumps are difficult to detect using non-destructive methods. Laser ultrasonic inspection is capable of detecting such defects by utilizing a high power laser pulse to induce vibrations in a microelectronic device while measuring the out of plane displacement using an interferometer. Quality can then be assessed by comparing the vibration response of a known-good device to the response of the sample under inspection.
The main limitation with the implementation of laser ultrasonic inspection in manufacturing applications is the requirement to establish a known-good reference device utilizing other non-destructive methods. My work will focus on developing a method to inspect flip chip devices without requiring a previously established reference. The method will automatically examine measurement data from a large sample set to identify those devices which are most similar. The selected devices can then be utilized to compose a hybrid reference signal which can be used for comparison and defect detection.
Current trends in the electronic packaging industry continue to drive toward increased solder bump density, making it increasingly difficult to generate strong ultrasonic signals in these stiffer devices. To overcome this difficulty, I propose a new excitation method which places the source of ultrasound at the inspection location for each test point on the device surface. This ensures that the same power is available for each inspection location while also increasing the signal to noise ratio. The hardware implementation of this method reduces the system complexity and required automation, which can significantly reduce equipment cost and inspection time.
The implementation of the proposed excitation method in conjunction with the use of a hybrid reference signal for defect detection will improve the utility of the laser ultrasonic inspection technique to on-line inspection applications where no other non-destructive methods are currently available.

Identiferoai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/29685
Date13 May 2009
CreatorsValdes, Abel
PublisherGeorgia Institute of Technology
Source SetsGeorgia Tech Electronic Thesis and Dissertation Archive
Detected LanguageEnglish
TypeThesis

Page generated in 0.0017 seconds