Return to search

Control of Vibration Systems with Mechanical Motion Rectifier and their Applications to Vehicle Suspension and Ocean Energy Harvester

Vibration control is a large branch in control research, because all moving systems may induce desired or undesired vibration. Due to the limitation of passive system's adaptability and changing excitation input, vibration control brings the solution to change system dynamic with desired behavior to fulfill control targets. According to preference, vibration control can be separated into two categories: vibration reduction and vibration amplification. Lots of research papers only examine one aspect in vibration control. The thesis investigates the control development for both control targets with two different control applications: vehicle suspension and ocean wave energy converter. It develops control methods for both systems with simplified modeling setup, then followed by the application of a novel mechanical motion rectifier (MMR) gearbox that uses mechanical one-way clutches in both systems. The flow is from the control for common system to the control design for a specifically designed system. In the thesis, active (model predictive control: MPC), semi-active (Skyhook, skyhook-power driven damper: SH-PDD, hybrid model predictive control: HMPC), and passive control (Latching Control) methods are developed for different applications or control performance comparison on single system. The thesis also studies about new type of system with switching mechanism, in which other papers do not talk too much and possible control research direction to deal with such complicated system in vibration control. The state-space modeling for both systems are provided in the thesis with detailed model of the MMR gearbox. From the simulation, it can be shown that in the vehicle suspension application, the controlled MMR gearbox can be effective in improving vehicle ride comfort by 29.2% compared to that of the traditional hydraulic suspension. In the ocean wave energy converter, the controlled MMR WEC with simple latching control can improve the power generation by 57% compared to the passive MMR WEC. Besides, the passive MMR WEC also shows its advantage on the passive direct drive WEC in power generation improvement. From the control development flow for the MMR system, the limitation of the MMR gearbox is also identified, which introduces the future work in developing active-MMR gearbox by using an electromagnetic clutch. Some possible control development directions on the active-MMR is also mentioned at the end of the thesis to provide reference for future works. / Master of Science / Vibration happens in our daily life in almost all cases. It is a regular or irregular back and forth motion of particles. For example, when we start a vehicle, the engine will do circular motion to drive the wheel, which causes vibration and we feel wave pulses on our body when we sit in the car. However, this kind of vibration is undesirable, since it makes us uncomfortable. The car manufacture designs cushion seats to absorb vibration. This is a way to use hardware to control vibration. However, this is not enough. When vehicle goes through bumps, we do have suspension to absorb vibration transferred from road to our body. The car still experiences a big shock that makes us feel dizzy. On the opposite direction, in some cases when vibration becomes the motion source for energy harvesting, we would like to enhance it. Hardware can be helpful, since by tuning some parameters of an energy harvesting device, it can match with the vibration source to maximize vibration. However, it is still not enough due to low adaptability of a fixed parameter system. To overcome the limitation of hardware, researches begin to think about the way to control vibration, which is the method to change system behavior by using real-time adjustable hardware. By introducing vibration control, the theory behind that started to be investigated. This thesis investigates the vibration control theory application in both cases: vibration reduction and vibration enhancement, which are mentioned above due to opposite application preferences. There are two major applications of vibration control: vehicle suspension control and ocean wave energy converter (WEC) control. The thesis starts from the control development for both fields with general modeling criteria, then followed by control development with specific hardware design-mechanical motion rectifier (MMR) gearbox-applied on both systems. The MMR gearbox is the researcher designed hardware that targets on vibration adjustment with hardware capability, which is similar as the cushion seats mentioned at the beginning of the abstract. However, the MMR cannot have capability to furtherly optimize system vibration, which introduces the necessity of control development based on the existing hardware. In the suspension control application, the control strategy introduced successfully improve the vehicle ride comfort by 29.2%, which means the vehicle body acceleration has been reduced furtherly to let passenger feel less vibration. In the WEC application, the power absorbed from wave has been improved by 57% by applying suitable control strategy. The performance of improvement on vibration control has proved the effect on further vibration optimization beyond hardware limitation.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/98004
Date08 May 2020
CreatorsXiong, Qiuchi
ContributorsMechanical Engineering, Zuo, Lei, Southward, Steve C., Barry, Oumar
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeThesis
FormatETD, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0025 seconds