Return to search

Dimensionering av varmvattenavstick för att undvika Legionellatillväxt : En simuleringsstudie utförd i COMSOL Multiphysics​ / Dimensioning of hot water branches to avoid Legionella growth : A simulation study conducted in COMSOL Multiphysics​

Bakterien Legionella pneumophila orsakar sjukdomen Legionella vilket har ökat i världen de senaste 20 åren och har troligtvis ett ännu större mörkertal. Den frodas i vattenrör mellan temperaturen 25–50 grader och vid installation av varmvattenrör i byggnader måste det tas hänsyn i riskzoner. Ett speciellt riskområde är varmvattenavstick som skapas för att kunna dra vidare vattenrör i framtiden. Där utsätts vattnet för större risk för stillastående och sjunkande temperaturprofil beroende på längd. Med hjälp av COMSOL Multiphysics® Modelling Software har ett teoretiskt ramverk för dimensionering av varmvattenavstick i byggnader skapats. Resultatet visar på hur stor strömningshastighet i vattenflödet, isoleringstjocklek och luftrörslängd har påverkan på hur långt avsticket kan vara utan att understiga kritisk temperatur. Resultatet kan användas som beslutsstöd givet att liknande avstickmodell och flödesprofil används samt om strömningshastighet i röret inte är längre än det i rapporten. / The bacterium Legionella pneumophila causes the disease Legionella which has seen an increase in the world over the last 20 years and likely has an even greater number of unrecorded cases. It thrives in water pipes between the temperature of 25-50 degrees and when installing hot water pipes in buildings certain factors must be taken into account. A special risk area is hot water branches that are created to be able to extend water pipes in the future. There, the water is at greater risk of stagnant and decreasing temperature profile depending on its length. With the help of COMSOL Multiphysics® Modelling Software, a theoretical framework for the dimensioning of hot water distances in buildings has been created. The result shows how the velocity in the water flow, the insulation thickness and the length of the air pipe have a great influence on how long the branch can be without falling below the critical temperature. The results can be used as decision support if one has a similar branch model and flow profile and also given a that a lower flow rate is not used.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-281994
Date January 2020
CreatorsCedell, Olle, Ljunggren, Elias
PublisherKTH, Hållbar utveckling, miljövetenskap och teknik
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTRITA-ABE-MBT ; 20539

Page generated in 0.0088 seconds