Planarization techniques such as Surface planer (better known as Fly-cut) and chemical-mechanical polishing (CMP) can be used to improve the bump roughness and bump height uniformity within the die and wafer which can be beneficial for solder based bump stacking and Cu-Cu direct bonding [1]. In this paper the influence of both planarization techniques on 20μm pitch Cu and CuNiSn bumps embedded in polymer are studied. The polymer protects the bumps from the shearing force of the planarization process and will later serve as a underfill material for the resulting gap of a 3D stack. The microbump planarization process will be discussed. Furthermore characterization of the bump height uniformity across the wafer using SEM and High Resolution Profilometry (HRP) is reported.
Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:ch1-qucosa-207164 |
Date | 22 July 2016 |
Creators | De Preter, Inge, Derakhshandeh, Jaber, Heylen, Nancy, Van Acker, Lut, June Rebibis, Kenneth, Miller, Andy, Beyer, Gerald, Beyne, Eric |
Contributors | TU Chemnitz, Fakultät für Elektrotechnik und Informationstechnik |
Publisher | Universitätsbibliothek Chemnitz |
Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
Language | English |
Detected Language | English |
Type | doc-type:conferenceObject |
Format | application/pdf, text/plain, application/zip |
Source | AMC 2015 – Advanced Metallization Conference |
Page generated in 0.0017 seconds