In today's digital world, information and communication technology accounts for 3%
and 2% of the global power consumption and CO2 emissions respectively. This
alarming figure is on an upward trend, as future telecommunications systems and
handsets will become even more power hungry since new services with higher
bandwidth requirements emerge as part of the so called ¿future internet¿ paradigm. In
addition, the mobile handset industry is tightly coupled to the consumer need for more
sophisticated handsets with greater battery lifetime. If we cannot make any significant
step to reducing the energy gap between the power hungry requirements of future
handsets, and what battery technology can deliver, then market penetration for 4G
handsets can be at risk. Therefore, energy conservation must be a design objective at the
forefront of any system design from the network layer, to the physical and the
microelectronic counterparts. In fact, the energy distribution of a handset device is
dominated by the energy consumption of the RF hardware, and in particular the power
amplifier design. Power amplifier design is a traditional topic that addresses the design
challenge of how to obtain a trade-off between linearity and efficiency in order to avoid
the introduction of signal distortion, whilst making best use of the available power
resources for amplification. However, the present work goes beyond this by
investigating a new line of amplifiers that address the green initiatives, namely green
power amplifiers. This research work explores how to use the Doherty technique to
promote efficiency enhancement and thus energy saving. Five different topologies of
RF power amplifiers have been designed with custom-made signal splitters. The design
core of the Doherty technique is based on the combination of a class B, class AB and a
class C power amplifier working in synergy; which includes 90-degree 2-way power
splitter at the input, quarter wavelength transformer at the output, and a new output
power combiner. The frequency range for the amplifiers was designed to operate in the
3.4 - 3.6 GHz frequency band of Europe mobile WiMAX. The experimental results
show that 30dBm output power can be achieved with 67% power added efficiency
(PAE) for the user terminal, and 45dBm with 66% power added efficiency (PAE) for
base stations which marks a 14% and 11% respective improvement over current stateof-
the-art, while meeting the power output requirements for mobile WiMAX
applications.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/5749 |
| Date | January 2012 |
| Creators | Hussaini, Abubakar S. |
| Contributors | Abd-Alhameed, Raed, Rodriguez, Jonathan, McEwan, Neil J. |
| Publisher | University of Bradford, School of Engineering, Design and Technology |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Thesis, doctoral, PhD |
| Rights | <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/"><img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-nd/3.0/88x31.png" /></a><br />The University of Bradford theses are licenced under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/">Creative Commons Licence</a>. |
Page generated in 0.0023 seconds