Return to search

Design and development of a direct methanol fuel cell for telecommunications

The demand for higher efficiency and cleaner power sources increases daily. The Direct Methanol Fuel Cells (DMFC) is one of those power sources that produces reliable electrical energy at high efficiencies and very low pollution levels. Remote
telecommunication sites need power sources that can deliver reliable power.
This dissertation informs the reader about the working principles of the DMFC and
the materials it consists of. A good amount of theoretical background is also given
on the DMFC, especially on the Membrane Electrode Assembly (MEA). Different
membranes as well as their properties are discussed. Results from other researchers
on DMFCs are also captured. A DMFC stack including a test rig, was built. The DMFC stack consisted of five single DMFC cells. Each cell contained an MEA, Gas Diffusion Layers (GDLS), highly corrosive resistant metal support grids, bipolar flow field plates and end plates. The DMFC stack was operated and tested in a test rig. The test rig held the air blower which supplied the cathode with the required oxidant (air), and the methanol solution tank plus its liquid pump. The liquid pump circulated the
methanol solution through the anode side of the stack.
It was observed that the DMFC is very susceptible to corrosion, especially if the
methanol solution becomes conductive owing to solubility of C02 in it. Methanol itself is a corrosive substance. However the results obtained from the experiments clearly indicate that the DMFC can be implemented as an electrical power source for
telecommunications.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:vut/oai:digiresearch.vut.ac.za:10352/146
Date06 1900
CreatorsJoubert, Hardus
ContributorsPienaar, H. C. v Z
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Formatxiv, 138 leaves
RelationPdf. Adobe Acrobat Reader

Page generated in 0.002 seconds