Return to search

Thermal Cycling Fatigue Investigation of Surface Mounted Components with Eutectic Tin-Lead Solder Joints

International Telemetering Conference Proceedings / October 28-31, 1996 / Town and Country Hotel and Convention Center, San Diego, California / Eutectic (63% tin-37% lead) or near-eutectic (40% tin-60% lead) tin-lead solder is widely used for creating electrical interconnections between the printed wiring board (PWB) and the components mounted on the board surface. For components mounted directly on the PWB mounting pads, that is, surface mounted components, the tin-lead solder also constitutes the mechanical interconnection. Eutectic solder has a melting point of 183°C (361°F). It is important to realize that its homologous temperature, defined as the temperature in degrees Kelvin over its melting point temperature (T(m)), also in degrees Kelvin, is defined as T/T(m). At room temperature (25°C = 298K), eutectic solder's homologous temperature is 0.65. It is widely acknowledged that materials having a homologous temperature ≥ 0.5 are readily subject to creep, and the solder joints of printed wiring assemblies are routinely exposed to temperatures above room temperature. Hence, solder joints tend to be subject to both thermal fatigue and creep. This can lead to premature failures during service conditions. The geometry, that is, the lead configuration, of the joints can also affect failure. Various geometries are better suited to withstand failure than others. The purpose of this paper is to explore solder joint failures of dual in-line (DIP) integrated circuit components, leadless ceramic chip carriers (LCCCs), and gull wing and J-lead surface mount components mounted on PWBs.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/611418
Date10 1900
CreatorsBonner, J. K. "Kirk", de Silveira, Carl
ContributorsCalifornia Institute of Technology
PublisherInternational Foundation for Telemetering
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Proceedings
RightsCopyright © International Foundation for Telemetering
Relationhttp://www.telemetry.org/

Page generated in 0.0021 seconds