This manuscript has been realized in the frame of SELENE experiment research activities. SELENE is the ac-ronym of Self-rewetting fluids for ENErgy management and consists of a space project aiming to investigate heat and mass transfer phenomena in mono-groove configuration with self-rewetting fluids (SRFs). Self-rewetting fluids are mixture showing an anomalous trend of surface tension with temperature, an inversion of the surface tension slope after certain temperature. As consequence, when the minimum in surface ten-sion is crossed, surface tension gradient at the meniscus interface pulls the liquid towards the warmest region, preventing hot spots. This mechanism is completely spontaneous and has an interesting potential when applied to heat transfer applications as heat pipes (HPs). In HPs heat is removed by the liquid at the warmest region (the evaporator) and transported at the coldest zone (the condenser) by phase change; here, heat is removed by the pipe and dissipated outside through a radiator. To operate correctly, liquid is supplied to the evaporator by capillarity and the liquid vapour is allowed to flow back to condenser from a dedicated pipe region where liquid is not allowed. Vapour condensation releases at the condenser the heat to be dissipated. When SRFs are replacing working fluid in HP applications and temperatures are higher than the characteristic minimum in surface tension, capillary force is assisted by inverse Marangoni flow at the vapour-liquid interface.Since heat pipe performances are related to liquid supplied at the evaporator, in order to compare SRFs and not SRFs working fluids, it is needed to split the contribution of Marangoni and capillary force in the liquid flow. Marangoni effect is related to surface tension gradient that, in a mixture as SRF, is dependent on temperature and local composition at the liquid interface. For all these reasons, SELENE is designed to be the link between scientific research on HPs and heat transfer applications using SRFs. SELENE consists of a mono-groove with trapezoidal section that can be considered as a “clump” of an Inner Grooved Heat Pipe (IGHP) and, in order to split capillary and Marangoni contribution, it is integrated dedicated tools providing the required data in terms of concentration and liquid meniscus shape. Experimental data are used to build a simplified thermo-soluto-fluido dynamic model describing the thermo-mechanic mechanisms between the liquid bulk and the vapour flow. In the manuscript here presented it has been carried on a technology development of the required diag-nostics for the SELENE space project. The diagnostics have been designed to work in microgravity condi-tions even if they are tested on ground. As concentration diagnostic, in the text are proposed several tech-niques and more interest is spent on the adaptation of I-VED (In vivo Embolic Detection) technology meas-uring fluid AC impedance to retrieve composition information; the technology is not yet mature to be inte-grated in SELENE but it presents interesting features to be investigated in microgravity conditions. As me-niscus reconstruction technique it is proposed a new and innovative technology developed in the frame of the presented thesis and it consists of a non-intrusive optical technique aiming to retrieve liquid meniscus shape (and so curvature) from a single visualization window mounted at the top of the SELENE breadboard.An analytical approach aiming to retrieve a simplified mathematical model of the transfer mechanisms is also provided in the text. The analytical analysis clearly shows the relations between the experimental measured data and the velocity profiles in the liquid and vapour regions. In addition, since in SELENE exper-iment the heat conduction across the groove itself is not negligible, in the text it is provided a semi-empirical thermal model based on the Multi Lumped Model (MLM) theory and able to retrieve local heat exchanged information along the pipe length. The model is used to compare experiments with different working fluids at different operational regimes. / Doctorat en Sciences de l'ingénieur et technologie / info:eu-repo/semantics/nonPublished
| Identifer | oai:union.ndltd.org:ulb.ac.be/oai:dipot.ulb.ac.be:2013/269864 |
| Date | 20 April 2018 |
| Creators | Tzevelecos, Wassilis |
| Contributors | Van Vaerenbergh, Stefan, Delplancke, Marie-Paule, Dubois, Frank, Savino, Raffaele, Carotenuto, Luigi, Karapantsios, Thodoris D, De Coninck, Joël |
| Publisher | Universite Libre de Bruxelles, Université libre de Bruxelles, Ecole polytechnique de Bruxelles – Chimie et Science des Matériaux, Bruxelles |
| Source Sets | Université libre de Bruxelles |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis, info:ulb-repo/semantics/doctoralThesis, info:ulb-repo/semantics/openurl/vlink-dissertation |
| Format | 4 full-text file(s): application/pdf | application/pdf | application/pdf | application/pdf |
| Rights | 4 full-text file(s): info:eu-repo/semantics/openAccess | info:eu-repo/semantics/closedAccess | info:eu-repo/semantics/closedAccess | info:eu-repo/semantics/openAccess |
Page generated in 0.0024 seconds