Return to search

Transformação do pó de aciaria elétrica em materiais com aplicações para remediação ambiental

O pó de aciaria elétrica (PAE) é um resíduo siderúrgico rico em ferro (Fe3+) e muitas vezes é disposto em aterros industriais devido à falta de tecnologias alternativas de baixo custo para sua reciclagem. Neste trabalho o PAE foi tratado termicamente (300, 400, 500, 600, 700 e 800 0C) sob fluxo de H2 com o objetivo de obter fases reduzidas de ferro (Fe3O4, FeO e Fe0). O PAE e os materiais obtidos foram caracterizados e utilizados em três tipos de reação para remediação ambiental: (i) reações Fenton heterogêneo para degradação do corante têxtil preto remazol (PR) e decomposição do H2O2, (ii) redução de Cr (VI) para Cr (III) e (iii) redução de nitrobenzeno presente em solução aquosa. Os resultados obtidos por espectrometria de absorção atômica por chama, difração de raios-X e espectroscopia Mössbauer mostraram que o PAE possui cerca de 21% de íons ferro e após tratamento térmico acima de 400 ºC as fases oxidadas deste metal foram reduzidas parcialmente a Fe3O4, FeO e Fe, chegando a obter cerca de 79% de ferro metálico. Os resultados da caracterização dos materiais obtidos também indicam a presença de magnetita substituída com zinco e manganês. Os resultados de área superficial BET mostraram que o PAE tem sua área superficial significativamente aumentada quando este é tratado termicamente a temperaturas superiores a 700 ºC. As imagens obtidas por microscopia eletrônica de varredura mostram que as partículas de PAE possuem em sua maioria formato esférico e após tratamento térmico observou-se uma significativa mudança na textura do material. Os testes catalíticos realizados para a decomposição do H2O2 em presença do corante PR mostraram que a velocidade desta reação diminui com o aumento da concentração de corante, sugerindo que as mesmas ocorrem por mecanismo radicalar. Nas reações Fenton heterogêneas para a degradação do corante PR, observou-se que o PAE obtido a 400, 500 e 600 ºC apresentaram melhores resultados, o que está relacionado com a presença de magnetita substituída combinada com fases reduzidas de ferro na superfície dos mesmos. Estes materiais ao ficarem em contato com a solução do corante PR notou-se a descoloração do corante e/ou mudança de cor da solução (de azul para rosa). Este efeito ocorreu principalmente devido à degradação redutiva do corante promovida pelas fases reduzidas de ferro presentes nos materiais. A capacidade redutiva destes materiais foi comprovada com a reação de redução do nitrobenzeno (NB) a anilina (AN), realizada com o PAE500, o qual reduziu cerca de 86% da concentração do NB e promoveu a formação de 1,81x10-5 mol L-1 de anilina. Os testes realizados para redução de Cr (VI) utilizando os materiais obtidos mostraram que todos apresentaram bons resultados, sendo que o PAE tratado a 600 e 700 ºC reduziram cerca de 100% do Cr (VI) em apenas 10 minutos de reação. / The electric arc furnace dust (EAF) steelmaking is a residue rich in iron (Fe3 +) and is often disposed in industrial landfills due to the lack of alternative technologies for low-cost recycling. In this work the EAF was heat treated (300, 400, 500, 600, 700 and 800ºC) under flowing H2, in order to obtain phase reduced iron (Fe3O4, FeO and Fe0).The EAF and materials were characterized and used in three types of reaction to environmental remediation: (i) heterogeneous Fenton reactions for degradation of textile dye Remazol Black (PR) and H2O2 decomposition, (ii) reduction of Cr (VI) to Cr (III) and (iii) reduction of nitrobenzene in aqueous solution. The results obtained by atomic absorption spectrometry with flame, powder X-ray diffraction and Mössbauer spectroscopy showed that the EAF has about 21% of iron ions and after thermal treatment above 400ºC The results obtained by atomic absorption spectrometry with flame, powder X-ray diffraction and Mössbauer spectroscopy showed that the EAF has about 21% of iron ions and after thermal treatment above 400ºC, the phases oxidized in this metal were reduced partially to Fe3O4, FeO and Fe0, coming to get about 79% of metallic iron. The characterization results of the obtained materials also indicate the presence of magnetite replaced with zinc and manganese. The BET surface area results showed that the EAF has its surface area increased significantly when it is heat treated at temperatures above 700ºC.The images obtained by scanning electron microscopy showed that the particles have EAF mostly spherical and after heat treatment showed a significant change in the texture of the material. The catalytic tests performed for the decomposition of H2O2 in the presence of the PR dye showed that the rate of this reaction decreases with increasing dye concentration, suggesting that it occurs by radical mechanism. In the heterogeneous Fenton reactions to degradation of the PR dye, it was possible to observe that the EAF obtained at 400, 500 and 600ºC showed better results, which is related to the presence of magnetite substituted combined with reduced iron phases on the surface. For the materials which remained in contact with the solution of the dye, it was possible to notice the PR discoloration and/or a change in the color of the solution (from blue to pink). This effect was mainly due to the reductive degradation of the dye promoted by reduced iron phases present in the materials. Reductive capacity of these materials was confirmed with the reaction of reduction of nitrobenzene (NB) to aniline (AN) performed with EAF500, which decreased about 86% of the concentration of NB and promoted the formation of 1.81 x10-5 mol L-1 aniline. The tests performed for reducing Cr (VI) using the obtained materials showed that all of them gave good results, while the EAF treated at 600 and 700ºC lowered about 100% of the Cr (VI) in 10 minutes of reaction. / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES

Identiferoai:union.ndltd.org:IBICT/oai:10.254.254.39:tede/355
Date25 July 2013
CreatorsPAULA, Leandro Neves de
ContributorsMAGALHÃES, Fabiano, http://lattes.cnpq.br/5554019041441308, URZEDO, Ana Paula Fonseca de, PEREIRA, Ernandes Benedito
PublisherUniversidade Federal de Alfenas, Instituto de Química, Brasil, UNIFAL-MG, Programa de Pós-Graduação em Química
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UNIFAL, instname:Universidade Federal de Alfenas, instacron:UNIFAL
Rightshttp://creativecommons.org/licenses/by-nc-nd/4.0/, info:eu-repo/semantics/openAccess

Page generated in 0.0027 seconds