Return to search

Additives in a steam engine to decrease friction : Friction testing of solid lubricants in powder form / Tillsatser i en ångmotor för att minska friktion : Friktionstester av fasta smörjmedel i pulverform

This thesis aims to investigate the coefficient of friction between steel on steel contacts with the addition of solid lubricants such as h-BN, WS2, MoS2 in powder form, in dry conditions and wet conditions. More specifically, the purpose is to enhance the sliding between the piston rings and cylinder block in a modern high temperature steam engine developed by RANOTOR. The friction test was carried out as a linear sliding test with determined loads and sliding speed. Hertzian contact theory was deployed to calculate contact pressure and shear stresses to make sure the contact was elastic, alternatively plastic. It was found that WS2 and  MoS2 lowered the coefficient of friction quite heavily in dry conditions, acting as a thin protective-lubricating film. h-BN performed rather poorly, increasing the coefficient of friction. In a water slurry, none of the powders managed to decrease the COF due to the particles not interacting with the surfaces.The solid lubricants tested should be further tested as coatings since they acted like it in dry conditions. / Denna rapport syftar till att undersöka friktionskoefficienten i stålkontakter med tillsats av fasta smörjmedel som  h-BN, WS2, MoS2 i pulverform, under torra och våta förhållanden. Mer specifikt är syftet att förbättra glidningen mellan kolvringarna och insidan av cylindern i en modern högtemperatur-ångmotor utvecklad av RANOTOR. Friktionstestet genomfördes som ett linjärt glidtest med bestämda belastningar och glidhastighet. Hertzian-kontaktteorin användes för att beräkna kontakttryck och skjuvspänningar för att säkerställa att kontakten var elastisk alternativt plastisk. Det visade sig att WS2och MoS2 kraftigt sänkte friktionskoefficienten under torra förhållanden genom att agera som en tunn skyddande-smörjfilm. h-BN presterade dåligt och ökade friktionskoefficienten. I vattenblandning lyckades inget av pulverna minska friktionskoefficienten eftersom partiklarna inte interagerade med ytorna. De testade fasta smörjmedlen bör vidare testas som beläggningar eftersom de fungerade som dessa under torra förhållanden.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-96402
Date January 2023
CreatorsLange, Viktor
PublisherKarlstads universitet, Institutionen för ingenjörsvetenskap och fysik (from 2013)
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf, application/pdf
Rightsinfo:eu-repo/semantics/openAccess, info:eu-repo/semantics/openAccess

Page generated in 0.0026 seconds