Return to search

energieffektiv transformering : Hur en befintlig byggnad blir energismart / Energy efficient transformation : How existing building becomes energy efficient

Municipalities around Sweden are building increasingly energy efficient buildings. The goals are to reduce energy consumption and increase renewable energy production in most new buildings. This is done to achieve the global goals that demands on the countries’ climate impact.  But how can you transform an older building into energy efficient? The study focuses on a case study of Krok’s mölla gården’s existing building where energy consumption is high and heat losses are large. The house needs to densify its climate shell, which leads to a higher indoor comfort. As the house has a high cultural value, minimal changes to the appearance must be made. The building has great potentials with its outer walls thickness of 500 mm provides a high insulation capacity. On the other hand, windows and exterior doors are the major contributers to heat energy loss. Which lowers the indoor temperature and increases energy consumption.  The case study is based on mixed methods that have been divided into two different phases. Phase one focuses on the preliminary study that lays the foundation for phase 2. During the application phase, the results of the preliminary study are applied to reduce energy consumption. Through simulation, the U-value of the house will be reduced and the electricity cost reduced by installing green technology.  The findings turned out to be able to reduce the cost of electricity by 75%. The u-value of windows could be halved to a u-value that minimizes heat loss compared to before the renovation. In order to reduce the household’s energy consumption even more, the house then needs to go through a major renovation of windows, doors and electronics that have a lower energy consumption. In this way, the house can produce an excess of energy and is then called a plus energy house. / Kommuner runt om i Sverige bygger alltmer energieffektiva byggnader. Målen är att sänka energiförbrukningen och öka förnybar energiproduktion i de flesta nybyggnationer. Det görs för att nå de globala målen som ställer krav på ländernas klimatpåverkan.  Men hur kan man transformera en äldre byggnad till att bli energieffektiv? Studien fokuserar på ett fallstudie av Kroks mölla gårdens befintliga byggnad där energiförbrukningen är hög samt värmeförluster är stora. Huset behöver förtäta sitt klimatskal vilket leder till en högre inomhus komfort. Då huset har ett högt kulturvärde ska minimala förändringar av utseendet göras. Byggnaden har stora potentialer med sina ytterväggars tjocklek på 500 mm ger en hög isoleringsförmåga. Däremot är fönster och ytterdörrar den stora värmeboven vilket sänker inomhustemperaturen och ökar energiförbrukningen.  Fallstudien bygger på blandade metoder som har delats upp i två olika faser. Fas ett fokuserar på förundersökning som lägger grunden för fas 2. Under tillämpningsfasen applicerar man förundersökningens resultat för att minska energiförbrukningen. Genom simulation ska husets U-värde minskas och elkostnaden sänkas installation av grön teknik.  Resultatet visade sig kunna sänka elkostnaden med 75%. Fönsters u-värde kunde halveras till ett u-värde som minimerar värmeför- luster i jämförelse med före renoveringen. För att minska hushål- lets energiförbrukning ännu mer behöver då huset genom gå en större renovering av fönster, dörrar och vitvaror som har en lägre energiförbrukning. På så sätt kan huset producera ett överskott av energi och då kallas för ett plusenergihus.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:mau-43921
Date January 2021
CreatorsOrellana del Canto, Rodrigo
PublisherMalmö universitet, Institutionen för Urbana Studier (US), Malmö university
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0024 seconds