University of Birmingham
Modelling, characterisation and optimisation of deep geothermal energy in the Cheshire basin
Abstract
dc:description.abstractDespite the significant geothermal resource in the UK, only one small scale scheme in Southampton is presently operating. Few wells have been drilled to target deep resources, particularly in the Cheshire Basin where only two wells have penetrated depths approaching 3 km. As a result, the knowledge of aquifer quality in the more central parts of the basin is limited, meaning there is a high geological risk associated to any geothermal development. To investigate this, a single well model was designed to simulate the extraction of fluid from the Collyhurst Sandstone Formation. Simulations of a range of geological and engineering parameters highlighted hydraulic conductivity could be the most significant obstacle to production, however, it could be minimised by altering engineering parameters (i.e., production rate, length and position of the well screen). A key issue with conventional extraction only methods is the disposal of waste water. To circumvent this issue, innovative deep borehole heat exchangers and standing column wells were modelled. Results indicated that both methods can produce heat loads up to 3.7 MW for short periods. Further analysis was also undertaken on heat exchangers, highlighting significant savings could be made from switching to a geothermal run heat network (>£49 million).
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2020
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Brown, Christopher Simon
Subjects
dc:subject × 3Rights
- Language dc:language.dcterms_iso639_2
- eng
Identifiers
dc:identifier.*- Dc Identifier Grantnumber
- NE/M00998X/1