Back to search

University of Birmingham

The formation of carbon in diffusion flames: with special reference to the effect of additives

Abstract

dc:description.abstract

Previous approaches to the problem of carbon formation in flames have been mainly direct ones, i.e. the correlation of the smoking tendency of hydrocarbons with their structural features, spectroscopic studies of the flame, etc. In the present work an indirect experimental approach to the problem has been used; the effect on the rate of soot formation from hydrocarbon/air diffusion flames, produced by introducing additives into both the fuel and air streams has been studied. In addition an examination has been made of the compounds in the soot from a Buta-gas/air diffusion flame and the nature of these compounds has been compared with those extracted from the soot of an acetylene/air diffusion flame. A circular diffusion burner has been employed and the measurement of the height of the flame and the weight of the soot collected in a given time have been adopted as two criteria of smoking tendency. The main findings are: (a) Halogenated compounds (CCI4, CHCI3, CH2Cl2j CH2Br\(2\), CH3I, C2H4Br2 and POCI3) increase the rate of soot formation from hydrocarbon/air diffusion flames. (b) (CH3)3 PO4 increases the rate of soot formation from flames and (CH3)2S causes a reduction in the flame's luminosity whilst CH3NO2 has no apparent effect. (c) The effectiveness of halogen compounds in increasing the rate of soot formation from the flames employed suggests that these compounds when introduced into a flame remove hydrogen and thus increase the rate of soot formation by causing more extensive dehydrogenation. The increase in the rate of soot formation caused by the addition of halogenated compounds is accompanied by a parallel production of halogen acids and a reduction in the CO2 content of the combustion gases. (d) There are minimum additive concentrations in the fuel and in the airs below which no effect on the rate of soot formation can be observed. The ratio of the minimum additive concentration (mol./mol.) in the fuel to make the flame just smoky to its corresponding concentration in the air stream is a constant and is independent of the nature of the additive. This ratio is very close to the stoichiometric air/fuel ratio for the fuel. (e) The compounds extracted from the soot of Buta-gas/air and acetylene/air flame are similar and the presence of polynuclear aromatic hydrocarbons has been detected. It is concluded from the results and the work of others that the formation of carbon in hydrocarbon flames takes place via preliminary cracking of the hydrocarbons as far as acetylene. The acetylene thus formed may undergo a simultaneous condensation and dehydrogenation (Porter’s theory) in high temperature flames, but in lower temperature flames polymerization and cyclization occur, giving polynuclear aromatic hydrocarbons (and possibly fulvenic compounds). These complex compounds then undergo a further condensation, possibly droplet formation occurs, and finally dehydrogenation and nucleation with graphite formation probably occurs, as suggested by several authors.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
1957

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Badakhshan, Amir

Subjects

dc:subject × 2

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Badakhshan, Amir. The formation of carbon in diffusion flames: with special reference to the effect of additives. d_ph thesis, University of Birmingham, 1957.