Back to search

University of Birmingham

Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools

Abstract

dc:description.abstract

Two types of CrAlSiN nano-multilayer coating were designed and synthesised on AISI M2 high speed steel. Selected coatings were also deposited on pre-nitrided M2 substrate to investigate the effect of duplex treatment. A series of type I CrAlSiN coatings, which have sharp interfaces between individual nano-layers, were designed with varying bilayer thickness. An fcc and an hcp phase were identified for all type I coatings, and it has been found that the bilayer thickness has a significant influence on the orientation of both phases, which in turn affects their mechanical properties. Type II CrAlSiN coatings, with blurred interfaces, were synthesised with a medium bilayer thickness. Due to the insignificant difference in composition between neighbouring nano-layers, only one fcc phase was found in type II CrAlSiN coating. The wear resistance of the new nano-multilayer CrAlSiN coating is about 10 times higher than CrN when tested at room and elevated temperatures. This could be attributed to high H/E ratio and good oxidation resistance conferred by the nano-multilayer structure and multi-component composition. It is also found that duplex treatment can improve the wear resistance of nano-multilayer coating by two orders of magnitude due to the improved load bearing capacity of the coating system.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ji, Ran

Subjects

dc:subject × 2

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ji, Ran. Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools. d_ph thesis, University of Birmingham, 2013.