University of Birmingham
Evaluation of poly-ether-ether-ketone (PEEK) for cervical disc replacement devices
Abstract
dc:description.abstractPoly-ether-ether-ketone (PEEK) is a high performance aromatic thermoplastic with proven biocompatibility. Recently, it has been proposed as a promising bearing material for cervical total disc replacement (TDR). A new bearing combination of PEEK-on-PEEK based self-mating articulation has been used, which may overcome current bearing materials related complications. For ball-on-socket based cervical TDR designs, PEEK based bearing articulation is expected to operate under a boundary lubrication regime regardless of the radial clearance used. The contact stress encountered by the bearing surfaces is insufficient to result in either material yield or fatigue failure. High-cycle fatigue tests were performed on PEEK 450G specimens via three-point flexural bending. The obtained fatigue results (104.1 ± 5.8 MPa) show superiority over the historical polymeric bearing material UHMWPE (31 MPa). Moreover, it demonstrates a good resistance to sterilisation and thermal ageing. Laboratory wear simulation was also conducted, using spine simulators and following ISO 18192-1 standard. For PEEK-on-PEEK self-mating articulation, a steady state wear rate of 1.0 ± 0.9 mg/million cycles is obtained, which is comparable as the historical bearing combination (UHMWPE against CoCrMo). The results of this work suggest that PEEK-on-PEEK based articulation is a possible alternative for future cervical TDR designs.
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2014
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Xin, Hua
Subjects
dc:subject × 3Rights
- Language dc:language.dcterms_iso639_2
- eng