University of Birmingham
Development of a novel oxide-oxide ceramic matrix composite for high temperature structural applications
Abstract
dc:description.abstractThe introduction of ceramic matrix composites (CMCs) for structural applications in the hot section of a gas turbine provides many potential benefits over conventional alloy materials, including facilitating elevated operating temperatures. The development of an oxide-oxide CMC composed of commercially available Nextel 720 (3M) fibres within a porous alumina matrix was presented. A simple, low cost processing method involving slurry impregnation and subsequent consolidation and densification was developed, facilitating the production of dried pre-impregnated fabric (‘pre-preg’) that can be stored in ambient conditions. Detailed investigation into the effect of three types of PVA binder, the effect of 0-20wt% additions of an alumina precursor (ACH), the influence of a bimodal particle distribution and the effect of sintering at temperatures between 1100 and 1300°C on processing and mechanical properties was completed in order to optimise the material. The optimised composite material, composed of Nextel 720 fibres within a submicron alumina particle matrix with 10wt% ACH sintered at 1200°C, exhibited mean flexural strength >205MPa, short beam shear strength >12MPa and tensile strength >146MPa. These results were comparable to similar oxide CMCs previously reported, validating this material.
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2015
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Dearn, Sophie Clare
Subjects
dc:subject × 2Rights
- Language dc:language.dcterms_iso639_2
- eng