University of Birmingham
Effects of palladium thin films on the hydrogen permeability of Pd-Cu alloy membranes
Abstract
dc:description.abstractThe hydrogen permeability of surface modified Pd60 Cu40 wt% (Pd47\(.\)3Cu52.7at%) membranes have been determined for the first time. Surface modification was accomplished through the deposition of Pd thin films of three different thicknesses (95.5 ± 0.1, 797.4 ± 0.2 and 1,409.6 ± 0.2 nm) on to one side of a range of as-received Pd60 Cu40 wt% membrane coated with a 1,409.6 ± 0.2 nm thick Pd thin film positioned on the feed side (445 kPa of hydrogen pressure) and cycled between 50 and 450 °C achieved the highest hydrogen permeability of 1.09 x 10-8 mol m-1 s-1 Pa-0.5 at 450 °C during the third cycle. This is a 58% increase on the value measured for the as-received Pd60 Cu40 wt% under the same conditions. This improvement can be attributed to a Pd-rich Pd-Cu face centred cubic (FCC) phase forming through interdiffusion between the Pd thin film and bulk Pd-Cu membrane as a result of the test conditions used during hydrogen permeability measurements. This introduces a larger hydrogen concentration gradient across the membrane due to the relatively high hydrogen solubility of the Pd-rich Pd-Cu FCC phase resulting in the observed increase in permeability.
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2015
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Al-Mufachi, Naser Azzat
Subjects
dc:subject × 1Rights
- Language dc:language.dcterms_iso639_2
- eng