University of Birmingham
The behaviour of double oxide film defects in the processing of liquid Mg alloys
Abstract
dc:description.abstractThe global demand for Mg alloys continually grew in the last 20 years, motivating a wide interest in the improvement of the mechanical properties of Mg-alloy castings. In addition, the existence of double oxide film defects, which were widely recognised as a major factor in the quality and reproducibility of the properties of light-alloy castings, has been demonstrated in Mg-alloy castings. Thus it became important to understand behaviour of double oxide film defects formed in Mg-alloys. In the work reported here, three different Mg alloys (commercial pure Mg, AZ91 alloy, and Mg-Y alloys) and two cover gases (SF6/air and SF6/CO2), were used, in order to involve different doubled oxide films which may have different behaviours. Direct and cross-sectional observations of the double oxide film defects formed the Mg-alloy castings protected by different cover gases were obtained via a Scanning Electron Microscopy (SEM), and the focus ion beam milling (FIB) technique. In addition, oxide films growing on the corresponding Mg-alloy melt surfaces were also investigated. Based on the observed film structures in conjunction with a thermochemical calculation, evolution processes of the different double oxide film defects were suggested. The quality of Mg-alloy castings was evaluated by the Weibull modulus, which is popularly used to discriminate “good” and “bad” castings. A shortcoming of the traditional Weibull estimation method (i.e. linear least square method) was demonstrated, and a new estimation method was therefore come up with. The Weibull modulus result revealed that air can confer an improvement in the quality of AZ91 castings, compared with CO2.
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2017
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Li, Tian
Subjects
dc:subject × 1Rights
- Language dc:language.dcterms_iso639_2
- eng