Back to search

Clemson University

Thermal Neutron Characterization and Dose Modeling of a Plutonium-239/Beryllium Alpha-Neutron Source

Abstract

dc:description.abstract

Determination of neutron dose can be challenging and requires knowledge of neutron energy and neutron flux. A plutonium-239/beryllium (239PuBe) alpha-neutron source was used to irradiate bacterial samples to create neutron dose response. The goal of this project was to characterize the thermal neutron flux of the 239PuBe alpha-neutron source and model the neutron dose using version MCNPX of the Monte-Carlo N-Particle transport codes. The 37 GBq 239PuBe alpha-neutron source was placed in a neutron “howitzer,” that is, a 2-ft diameter moderating barrel with four radial irradiation ports. Multi-foil activation was used at various distances to determine thermal neutron flux, which was then used to verify a MCNPX code representing the system. Dysprosium thermal foils were used with cadmium covers. The MCNPX code was then adapted for dosimetric modeling. That is, the F5 tally, with a dose function, was used in place of the F4 tally. The four irradiation ports were found to have average thermal neutron fluxes of 5334 ± 829, 2928 ± 451, 1289 ± 199, and 1211 ± 186 neutrons cm-2 s-1 at 3.58, 9.04, 12.8, and 13.7 cm from the 239PuBe alpha-neutron source, respectively. The adapted MCNPX code calculated theoretical total ambient dose equivalent rates of 1717 ± 90.2, 703 ± 37.0, 286 ± 15.0, and 174 ± 9.18 mrem hr-1 at 4, 8, 14, and 18 cm from the 239PuBe alpha-neutron source, respectively. The theoretical direct (uncollided) ambient dose equivalent rates at the same distances were 837 ± 44.0, 272 ± 14.3, 100 ± 5.29, and 63.1 ± 3.32 mrem hr-1, respectively. Rough estimates of the absorbed dose rates were made from the ambient dose equivalent rates and a recommendation of 23.6 cm from the PuBe source was made to achieve an absorbed dose rate of roughly 10 mGy d-1.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Environmental Engineering and Earth Sciences

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Willey, Adam Hunter
Contributors dc:contributor
  • Dr. Nicole E. Martinez, Committee Chair
  • Dr. Timothy A. DeVol
  • Dr. Mark A. Blenner

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/3023

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Willey, Adam Hunter. Thermal Neutron Characterization and Dose Modeling of a Plutonium-239/Beryllium Alpha-Neutron Source. Thesis thesis, https://open.clemson.edu/all_theses/3023