Back to search

Cornell University

Solution-Processable Solar Cell Technologies

Abstract

dc:description.abstract

The high cost of production of solar panels has prevented the widespread adoption of solar energy. A possible solution is to pursue solution-based solar cell technologies, since they can enable a low-cost and high-throughput manufacturing process. Both organic semiconductors and inorganic nanocrystals have emerged as promising solution-processable materials for solar cells. In this dissertation, I present my work on the investigation of both classes of materials for solar cell applications. Organic photovoltaics consist of donor and acceptor organic semiconductors. The mechanism of charge transfer between the donor poly(3-hexylthiophene) (P3HT) and acceptor C60 was studied by incorporating an inter-layer into the bilayer solar cell. Charge transfer was shown to take place in a two-step process whereby energy transfer of the photo-generated excitons in P3HT to C60 is followed by a backward charge transfer step to P3HT. Novel ways to process these materials are also investigated. Solar cells from P3HT and a fullerene derivative, phenyl C61-butyric acid methyl ester (PCBM) were fabricated by spray-deposition. Good power conversion efficiencies above 2 % were demonstrated, indicating the viability of spray deposition as a fabrication method. In a separate effort, a novel fluorinated resorcinarene photoresist was used to photolithographically pattern solar cells based on a blend of P3HT and PCBM for highvoltage applications. A 15 mm array of 300 solar cells connected in series achieved an open circuit voltage (VOC) of 90 volts. Three new classes of materials for organic solar cell acceptors are presented, namely pentacenes, hexacenes, and anthradithiophenes. Solar cells based on P3HT and pentacenes gave efficiencies as high as 1.2 %. The hexacenes have the lowest bandgap, enabling hexacene-based solar cells to have photocurrent response up to 800 nm. The anthradithiophene-based solar cells achieved the highest VOC approaching 1.1 Volts, and decent efficiencies of around 0.8 %. Finally, a facile alcothermal method for the synthesis of dispersible CuO and Cu2O nanocrystals is presented. A bilayer CuO / PCBM solar cell demonstrated an efficiency of 0.04 %, indicating the potential of these materials for light harvesting applications.

Degree

thesis:*
Name thesis:degree_name
Ph. D., Applied Physics
Level thesis:degree_level
Doctor of Philosophy
Discipline thesis:degree_discipline
Applied Physics
Grantor
Cornell University
Year dc:date.issued
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lim, Yeefun
Chair dc:contributor.chair
  • Malliaras, George G
Committee members dc:contributor.committeemember
  • Wise, Frank William
  • Blakely, John M
  • Hanrath, Tobias

Subjects

dc:subject × 3

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Dc Identifier Bibid
8213963

Chain of custody

source
Harvested from
Cornell University
Base URL
ecommons.cornell.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lim, Yeefun. Solution-Processable Solar Cell Technologies. Doctor of Philosophy thesis, Cornell University, 2011. https://hdl.handle.net/1813/33652