Back to search

Georgia Institute of Technology

Influence of Spark Energy, Spark Number, and Flow Velocity on Detonation Initiation in a Hydrocarbon-fueled PDE

Abstract

dc:description.abstract

Pulsed Detonation Engines (PDEs) have the potential to revolutionize fight by better utilizing the chemical energy content of reactive fuel/air mixtures over conventional combustion processes. Combustion by a super-sonic detonation wave results in a significant increase in pressure in addition to an increase in temperature. In order to harness this pressure increase and achieve a high power density, it is desirable to operate PDEs at high frequency. The process of detonation initiation impacts operating frequency by dictating the length of the chamber and contributing to the overall cycle time. Therefore a key challenge in the development of a practical PDEs is the requirement to rapidly initiate a detonation in hydrocarbon-air mixtures. This thesis evaluates the influence of spark energy and airflow velocity on this challenging initiation process. The influence of spark energy, number of sparks and airflow velocity on Deflagration-to-Detonation Transition (DDT) was studied during cyclic operation of a small-scale PDE at the General Electric Global Research Center. Experiments were conducted in a 50 mm square transitioning to cylindrical channel PDE with optical access operating with stoichiometric ethylene-air mixture. Total spark energy was varied from 250 mJ to 4 J and was distributed between one and four spark plugs located in the same axial location. Initial flame acceleration was imaged using high-speed shadowgraph and was characterized by the time to reach 20 cm from the spark plug. Measurements of detonation wave velocity and emergence time, the time it takes the detonation wave to exit the tube, was measured using dynamic pressure transducers and ionization probes. It was found that the flame front spread was faster at higher spark energies and with more spark locations. Initial flame acceleration was 16% faster for the 4-spark, 4 J case when compared to the baseline 1-spark, 1 J case. When looking at the effect of airflow on the influence of spark energy, it was found that airflow had a larger effect on emergence time at high energies, versus energies less than 1 J. Finally, for a selected case of 0.25 J spark energy and 4 sparks, the velocity of the fuel-air mixture during fill was found to have a varying influence on detonation initiation and emergence time.

Degree

thesis:*
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2005

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Schild, Ilissa Brooke
Advisors dc:contributor.advisor
  • Lieuwen, Timothy C.
  • Dean, Anthony
Committee members dc:contributor.committeemember
  • Wepfer, William
  • Zinn, Ben

Subjects

dc:subject × 16

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/7527

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Schild, Ilissa Brooke. Influence of Spark Energy, Spark Number, and Flow Velocity on Detonation Initiation in a Hydrocarbon-fueled PDE. Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/7527