Georgia Institute of Technology
Exploring Novel Substrate Designs and Circuit Fabrication Techniques for Advanced Power Electronics Packaging
Abstract
dc:description.abstractRecent advances in technology coupled with policies across the globe enacted to counter the environmental impact of climate change have engendered a push for more renewable and sustainable sources of power, including the electrification of automotive and industrial systems. Power electronics play a key role in these systems, managing both the waveform (DC or AC) and magnitude of the current or voltage being supplied to an electrical load. However, this process introduces inefficiencies that lead to power dissipation, causing device heating and raising reliability concerns for power devices. As devices become smaller and operating temperatures increase, combating system failure due to over-temperature or heat damage becomes critical. To address these concerns, a power package design has been developed that brings the thermal management features closer to the device by bonding the dielectric substrate directly to a heat sink of similar coefficient of thermal expansion (CTE) via a transient liquid phase (TLP) bond, enhancing the thermo-mechanical reliability of the package and eliminating multiple material layers, thereby decreasing the thermal resistance of the assembly. In order to thoroughly investigate the composition of the bond and assess the TLP technique in bonding commercial substrates to low CTE cold plates as a packaging alternative, experimental methods on a variety of AlN, Al and Cu substrates TLP bonded to AlSiC heat sinks are conducted and the results validated through numerical modeling. A complete analysis of the bond material composition, microstructure, intermetallic phases and the impact of processing parameters on solid-state diffusion in the binary system is provided. Subsequently, an investigation into the mechanical and thermo-mechanical characteristics of various Cu-Al composites fabricated through a similar TLP bonding process is presented. Finally, potential approaches for manufacturing a metal circuit layer on the AlN dielectric ceramic using additive manufacturing methods are explored, supporting the development of a functional power package with enhanced electrical conductivity for electronic devices.
Degree
thesis:*- Level thesis:degree_level
- Doctoral
- Department dc:contributor.department
- Mechanical Engineering
- Grantor dc:publisher
- Georgia Institute of Technology
- Year dc:date.issued
- 2023
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Imediegwu, Chidinma Chimara
- Advisors dc:contributor.advisor
-
- Graham, Samuel
- Pahinkar, Darshan G.
- Committee members dc:contributor.committeemember
-
- Antoniou, Antonia
- Joshi, Yogendra
- Bakir, Muhannad
Subjects
dc:subject × 16- Power electronics
- wide band gap
- thermal interface material
- mechanical characterization
- coefficient of thermal expansion
- circuit development
- additive manufacturing
- 3D printing
- conductive ink
- electrical conductivity
- thermal stability
- printed electronics
- current density
- ampacity
- thermo-mechanical modeling
- reliability assessment
Rights
- Language dc:language.iso
- en_US
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- https://hdl.handle.net/1853/76760