Back to search

University of Glasgow

Nanocharacterisation of zirconia based RRAM devices deposited via PLD

Abstract

dc:description.abstract

With CMOS technology reaching fundamental scaling limitations, innovative data storage technologies have been a topic of great academic and industrial interest. Emerging technologies, not all based in semiconductors, that exploit new variables like spin, polarisation, phase and resistance, are being investigated for their feasibility as data storage devices. One very promising technology is resistive switching random-access memory (RRAM). In RRAM devices memory operation relies on the change in resistance of a metal-insulator-metal structure, typically induced by ion migration combined with redox processes. Here, RRAM devices based on amorphous and crystalline zirconia have been prepared by means of pulsed laser deposition (PLD). The thesis starts with an overview of the commissioning of a new PLD system, with a focus on characterisation of the laser ablation plume, reduction of the density of “droplets” and development of the optimal system parameters, like temperature, oxygen pressure and laser fluence, for the preparation of zirconia based RRAM devices. For both amorphous and crystalline devices, titanium was used as an active electrode as it promotes the introduction of oxygen vacancies which are responsible for inducing resistive switching. In addition, growth of epitaxial Nb doped strontium titanate (Nb:STO) via PLD was achieved, as the high temperatures used during growth hinder the use of metallic bottom electrodes. Both types of RRAM devices have good performance figures, with ON/OFF ratios of 1000 and 10000 and endurance of more than 10000 cycles. Conduction mechanisms point to two different types of resistive switching: insulator-to-metal transition and trapping and de-trapping at the metal-oxide interfaces. Surprisingly, both conduction mechanisms were found to coexists on amorphous devices. Scanning transmission electron microscopy and electron energy loss spectroscopy were used to investigate how interfaces can influence resistive switching. Results indicate that titanium, in addition to introducing oxygen vacancies, creates an ohmic interface with zirconia which forces the resistive switching to take place on the inert metal-oxide Schottky interface, which was not described so far.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Parreira, Pedro Miguel Raimundo

Subjects

dc:subject × 1

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Parreira, Pedro Miguel Raimundo. Nanocharacterisation of zirconia based RRAM devices deposited via PLD. PhD thesis, University of Glasgow, 2015.