Back to search

National Technical University of Athens (NTUA)

Τεχνολογίες εκμετάλλευσης της θερμότητας καυσαερίων σε κινητήρες diesel

Abstract

dc:description

The main purpose of the thesis is the study of Exhaust Gas Heat Recovery Techniques in Diesel Truck Engines. The examined heat recovery technologies are the following: (a) Electrical turbocompounding with an electric generator installed on the turbocharger shaft (b) The other examined arrangement of turbocompounding includes a power turbine placed downstream of the turbocharger turbine. (c) Thermoelectric generator for the direct conversion of the extracted exhaust gas heat to electrical energy. (d) Rankine cycle system operating with H2O or R245ca as working medium. A heat recuperator is installed to improve the thermodynamic efficiency of the organic Rankine cycle. The potential use of EGR and charge air cooler as major components of Rankine cycle system is also examined. A turbocompounding simulation model has been developed by including operating charts for turbocharger and power turbine. Thus, an estimation of the power turbine operation on turbocharger and engine performance. A separate finite element model has been also conducted to evaluate the performance of a thermoelectric generator installed in a diesel engine. A thermodynamic simulation model for Rankine cycle has been developed including a sub-model for the description of heat transfer between the hot fluid and the working medium. The developed simulation tool provides the optimum Rankine cycle operating points at each engine load. Thus, the model estimates the dimensions of the system heat exchangers. The theoretical analysis provided the following results: # The electrical turbocompound improves the overall bsfc when the turbocharger efficiency increases. # The installation of a power turbine downstream of the turbocharger turbine reduces further the overall bsfc compared to the previous technique at all engine loads. # The improvement of specific fuel consumption is negligible when using thermoelectric generators for exhaust gas heat recovery. # The maximum reduction in the overall bsfc is achieved with the installation of the organic Rankine cycle system for heat exploitation from exhaust gas, EGR and charge air cooler. # The significant increase of the total rejected heat from Rankine cycle and diesel engine to the ambience is the major disadvantage of the system. The size reduction of the required cooling system is feasible with the modification of Rankine cycle operation at full engine load. # The use of Rankine cycle system for exhaust gas temperature management proved to be beneficial for the improvement of SCR catalyst efficiency and its protection during active filter regeneration. # The size estimation of the Rankine cycle components proved that the installation of the system on a heavy duty truck is feasible.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Katsanos, Christos
  • Κατσάνος, Χρήστος

Subjects

dc:subject × 24

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/24966

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Katsanos, Christos; Κατσάνος, Χρήστος. Τεχνολογίες εκμετάλλευσης της θερμότητας καυσαερίων σε κινητήρες diesel. National Technical University of Athens (NTUA), 2011. http://hdl.handle.net/10442/hedi/24966