Back to search

University of Piraeus (UNIPI)

Διερεύνηση κατασκευής βιο-συμβατής μικρο-βαλβίδας με την μέθοδο της μικρο-στερεολιθογραφίας

Abstract

dc:description

The main objective of this thesis was to investigate the possibility of creating bio-compatible micro-valves using micro-stereolithography and two photon polymerisation. The methodology followed, incorporated as its first part, the regular, non-destructive investigation of the properties of two acrylate biocompatible photo-curable resins used in photofabrication. The second part was based on the investigation and optimal design of non-return biocompatible micro-valves. The particular valves can be constructed successfully with moving parts that require no assembly at the end of the construction process, through the use of these materials and the technique of micro-stereolithography (μSLA). The third part of the methodology focused on the final construction of the final designs of the micro-valves. More specifically, different geometries were utilised for the micro-structures in general, that require appropriate adjustment of process parameters (such as scanning speed of the material, thickness of solidified energy laser system, etc.) of the production technology which was used for their successful development. Conclusions: • Ormocer®-Ormocomp presents an immediate response to ultraviolet radiation, and develops very high residual strains • The maximum extent of residual strains developed is in the range of 17.000 to 18.000 με which is particularly high when compared with epoxy resins that exhibit residual strains development of about 3.000 to 4.000 με • The mechanical properties of Ormocer®-Ormocomp were determined using three different experimental procedures identifying an average value for the modulus of elasticity of the material of Emean = 1,3 GPa • The first valve design (piston) has a structure that was designed to be constructed with minimal occurrence of stair-step effect • The main advantage of the secondary valve design over the first (structure with internal moving blades) is its strength against high blood pressure stresses that develop in the human veins • After the construction of both valve designs, the best material for this particular application was determined to be the zirconium.

Degree

thesis:*
Grantor dc:publisher
University of Piraeus (UNIPI)
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Schizas, Charalampos
  • Σχίζας, Χαράλαμπος

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/26115

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Schizas, Charalampos; Σχίζας, Χαράλαμπος. Διερεύνηση κατασκευής βιο-συμβατής μικρο-βαλβίδας με την μέθοδο της μικρο-στερεολιθογραφίας. University of Piraeus (UNIPI), 2010. http://hdl.handle.net/10442/hedi/26115