Aristotle University Of Thessaloniki (AUTH)
Διερεύνηση της υπολογιστικής προσέγγισης των εδαφικών κατολισθήσεων
Abstract
dc:descriptionThe analytical approach of Landslides in soils, is usually achieved through either, the application of phenomenological methods, or limit equilibrium methods, or the even more sophisticated finite elements method. The analysis of landslides can be affected by numerous parameters, some of which are usually neglected, reducing the quality of the results. We investigated how these variables affect the analysis; in particular, we examined, the relationship between values of the safety factor and the movement velocity and changes in geometry of the landslide, the soil creep, the shear strength of partly saturated soils, the appropriate application of the finite elements method through the selection of soil models that are able to simulate both the behavior of specific materials and the overall failure mechanism, the effect of the three dimensional geometry on the estimation of the stability and the use of appropriate methods to forecast the remaining time to failure. The aim of this thesis was to produce useful methods and guidelines for a successful analytical approach of landslides in soils, taking into account the aforementioned subjects. The main results and the original contribution of this thesis, is summarized in the following points: 1. The calculation and design of the critical failure surfaces, for various slopes, consisting of homogenous soil and various values of the λcφ parameter, 2. The calculation of the effect of geometry changes on the safety factor, during the evolution of a landslide for various slopes and values of the λcφ parameter, 3. The development of soil creep theory in landslides, introducing stress paths technique, 4. The correlation of the variation of safety factor with the displacement velocity and the calculation of the increase of the safety factor needed to stop the motion, with the application of a modified version of the Gudehus (Gudehus & Schwarz 1985) approach in actual cases, 5. A new approach that improves the introduction of soil suction in slope stability analyses with limit equilibrium methods, relating the φb angle to the degree of saturation and suction, and discretizing the unsaturated zone in layers of constant φb values, 6. The investigation of the relationship between the safety factor and the maximum displacement in excavated slopes, using the finite elements method (HSM – Plaxis 8.2), for a specific distribution of E50, Eoed and Eur with depth, 7. The Investigation of the failure mechanism in two actual landslides, using the finite elements method (Phase2 – Rocscience), simulating the weak soil zones inside the intact rock mass, based on inclinometer readings, providing with the opportunity for more precise calculation of the remedial measures, 8. The correlation of the F3D/F2D ratio to the B/L ratio for various slopes and values of the λcφ parameter, in homogenous slopes with ellipsoidal failure surfaces, symmetrical by the axial plane in the direction of movement and 9. The development and application of a new approach of forecasting the time to failure in landslides, based on the displacements – time curve.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Γάκης, Άγγελος
- Gakis, Angelos
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/26182