Back to search

Aristotle University Of Thessaloniki (AUTH)

Παρασκευή ink-jet μελανών διασποράς με ενεργά συστατικά ως πρόσθετα για ψηφιακή εκτύπωση πολυεστερικών και πολυαμιδικών υφασμάτων: μελέτη ιδιοτήτων, εφαρμογές

Abstract

dc:description

The preparation of water based inks which contain active agents for digital printing to polyester and polyamide samples is described. As active agents were used fragrance, antimicrobial agents and antifraud markers. Water based inks contain typically 30-80% water as a proportion of the total mass of the ink together with a water miscible organic solvent such as a monohydric alcohol and the colorant (eg. disperse dye). The preparation of the disperse inks was made using water and a mixture of 2-propanol/ethylene glycol as the water miscible solvent. Ethylene glycol was acting also as a wetting agent. The surface tension, pH, viscosity and conductivity of the above formulations were monitored over a period of 90 or 180 or 360 days. Monitoring a formulation over a period of time is a widely accepted method for evaluating dispersion stability. The same inks were prepared by adding microcapsules of an active agent (fragrance, antimicrobial agent, antifraud markers) in three different concentrations in the formulation as an active additive and the properties were monitored over 90 or 180 or 360 days. Incorporating successfully an active ingredient as a component in an ink according to the ink-jet ink requirements is a challenge to the producer. It gives the possibility of producing more flexible individualizing low cost products according to the consumer demand (Functioonal textiles the latest novelty in the textile industry). The inks were used for conventional dyeing and ink-jet printing on paper, and then thermostabilization on polyester, polyamide. Qualitative and quantitative determination of the fragrance adsorbed on the dyed and printed polyester was made by using Gas Chromatography- Mass Spectroscopy (GC-MS). Quantitative determination of the antimicrobial agent and antifraud marker adsorbed on the dyed and printed fibres was made by measuring spectrophotometrically the absorbance of each compound at its λmax. A similar kinetic and equilibrium study in polyester and polyamide samples was made for the cationic surfactant GH-20. For the dyed and printed samples which contain antimicrobial agents an antimicrobial test was made. Colour coordinates were measured on the dyed and printed samples. Wash and light fastness were also evaluated.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Karanikas, Evangelos
  • Καρανίκας, Ευάγγελος

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/28368

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Karanikas, Evangelos; Καρανίκας, Ευάγγελος. Παρασκευή ink-jet μελανών διασποράς με ενεργά συστατικά ως πρόσθετα για ψηφιακή εκτύπωση πολυεστερικών και πολυαμιδικών υφασμάτων: μελέτη ιδιοτήτων, εφαρμογές. Aristotle University Of Thessaloniki (AUTH), 2012. http://hdl.handle.net/10442/hedi/28368