Back to search

National Technical University of Athens (NTUA)

Συγκριτική αξιολόγηση ανθεκτικότητας γεωπολυμερών από ιπτάμενη τέφρα και τσιμεντοκονιαμάτων

Abstract

dc:description

In the present PhD thesis the durability of fly ash geopolymer mortars compared to that of cement mortars is investigated. Three series of fly ash based geopolymer mortars were prepared using calcareous sand to fly ash ratio (S/FA) varying from 0.5 to 2. In addition, cement mortar specimens were prepared (according to EN 196-1) using cement CEM I 42.5 N and CEM II 32.5 N. The geopolymers’ synthesis (R/Al, Na/(Na+K), [Si]/R2O) was optimized using Taguchi experimental designing model in order to achieve the maximum compressive strength. Durability of geopolymer and cement mortars was evaluated by means of compressive strength development, sorptivity, carbonation, resistance to wet-dry cycles, resistance to freezing-thawing cycles, acid resistance, chloride diffusion, sulfate resistance and thermal stability at elevated temperatures. It was found that fly ash can be effectively used to produce geopolymer mortars with calcareous sand. Geopolymers exhibit competitive compressive strength compared to that of cement mortars. Geopolymer mortars develop their maximum compressive strength a few days after their casting. Geopolymer and cement mortars exhibit satisfactory resistance to wet – dry cycles, carbonation and sulphate attack. Cement mortars, generally, show better behavior (compared to geopolymers) in sorptivity, freezing–thawing, chloride diffusion and thermal stability (at elevated temperatures). It must be noted, that even in these tests specific geopolymers (depending on the sand to fly ash ratio) present better behavior than specific cement mortars (depending on cement type and strength class). Finally, geopolymers indicate improved performance against acid attack, compared to that of cement mortars. Based on all durability tests, it is seen that the CEM I 42.5 presents the best performance, followed by the CEM II 32.5 and the geopolymers samples made with increased sand content (S/FA: 1 and 2). Geopolymers with a median sand content (S/FA=1) show an overall average behavior without extreme characteristics. The results of this study showed that there is not a unique formula that can produce geopolymers with good performance in all durability tests. Synthesis parameters should be adjusted so that the produced geopolymers exhibit satisfactory properties depending on the application.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Asprogerakas, Aristidis
  • Ασπρογέρακας, Αριστείδης

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38697

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Asprogerakas, Aristidis; Ασπρογέρακας, Αριστείδης. Συγκριτική αξιολόγηση ανθεκτικότητας γεωπολυμερών από ιπτάμενη τέφρα και τσιμεντοκονιαμάτων. National Technical University of Athens (NTUA), 2013. http://hdl.handle.net/10442/hedi/38697