University of Patras
Βέλτιστος σχεδιασμός μικρο-αντιστροφέα τύπου Flyback για τη σύνδεση φωτοβολταϊκού πλαισίου με το δίκτυο χαμηλής τάσης
Abstract
dc:descriptionContrary to other energy sources, photovoltaic (PV) systems may be installed in residential areas (building integrated photovoltaics), where the main electrical consumption exists. In order to inject the harvested electrical power to the utility grid, a DC/AC power electronics converter (inverter) is needed. This conversion can be done for the sum of the PV panels using a centralized inverter (string inverter), or by using separate and independently operated converters for each PV panel (micro-inverters).The main objective of this PhD dissertation is the thorough investigation and improvement of the behavior and performance of the flyback micro-inverter, in order to achieve maximum weighted efficiency.A new hybrid modulation method is proposed for the flyback micro-inverter, called DBCM, which inherits the merits of both existing methods DCM and i-BCM. Using the hybrid DBCM, the maximum switching frequency of the converter is limited for lower power levels, as well as on the edges of the sinusoidal wave, resulting to an efficiency improvement, especially for low power levels. At the same time, the converter output power quality is improved, compared to i-BCM.For the proposed modulation method, the power losses for each converter component are analyzed, together with the calculation of the rms or average current values. After that, the derived formulas as well as the inverter specifications and constraints are integrated into an optimization algorithm, specifically created for DBCM, which determines the component design values to achieve the maximum weighted efficiency for the given specifications.Furthermore, the application of the hybrid modulation is extended for the use on an interleaved flyback micro-inverter and the methodology to determine the suitable activation intervals is analyzed. Moreover, the timing equations for the interleaved operation are extracted, together with the determination of the rms and average current values, as well as the components power losses as a function of the converter design parameters. With the proposed technique, the weighted efficiency is significantly increased.As a next step, the mandatory control algorithms are implemented in the converter’s microcontroller (MPPT, anti-islanding) and the protection circuits are added, in order for the converter to meet the safety standards and requirements for PV inverters, connected to the utility grid. What is more, the possibility of reactive power injection is investigated for the current topology and the equations that describe the operation as well as the required circuit modifications are analyzed. In addition, an improved control method for the use of an active filter, connected in parallel to the PV panel output, is presented, which improves the system reliability and performance. This filter replaces the electrolytic capacitor, which was necessary to reduce the PV output current ripple, but had a severe impact on the converter reliability.The mathematical analysis presented in this dissertation is validated using simulation results, as well as experimentally, through developed laboratory prototypes, in order to quantify the performance improvements using the proposed methods.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Christidis, Georgios
- Χρηστίδης, Γεώργιος
Subjects
dc:subject × 29- Αντιστροφέας
- Αξιοπιστία
- Απώλειες αγωγής
- Βελτιστοποίηση
- Διακοπτικές απώλειες
- Ενεργό φίλτρο
- Εντοπισμός σημείου μέγιστης ισχύος
- Κτηριακά φωτοβολταϊκά συστήματα
- Μαγνητικές απώλειες
- Παροχή άεργου ισχύος
- Σταθμισμένος βαθμός απόδοσης
- Φαινόμενο νησίδας
- Active filter
- Anti-islanding
- Conduction losses
- Flyback
- Magnetic losses
- Maximum power point tracking
- Micro-inverter
- Module integrated converter
- Optimization
- Reactive power injection
- Reliability
- Switching losses
- Weighted efficiency
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39300