National Technical University of Athens (NTUA)
Ατομιστική και αδροποιημένη προσομοίωση νανοδομημένων πολυμερικών υλικών: νανοσύνθετα ατακτικού πολυστυρενίου - άμορφης πυριτίας
Abstract
dc:descriptionDesigning and implementation of a computational methodology of molecular simulations at two levels of representation (united atom and coarse-grained) for the study of polymer nanocomposites is the goal of this work. Molecular simulations constitute an effective way for studying these materials and calculating their properties. They are also able to highlight, in atomistic detail, the mechanisms underlying microscopic behavior, as well as predict properties from molecular-level structure, which is very important for the industrial production and use of these materials.In more detail, modeling and simulation at more than one length and time scales (multiscale modeling and simulation) in this thesis focus on quantifying the effect of the presence of amorphous silica nanoparticles on structural, dynamical, topological, and mechanical properties of atactic polystyrene of high molecular weight. The complexity of intermolecular interactions and confinement in polymer – nanoparticle systems leads to spatial variations in structure and dynamics at both the meso- and nanoscale. The attributes of a heterogeneous composite material depend on the properties of its component materials and on the characteristic length scale of their coexistence, as well as on the chemical and morphological details of the dispersion. The term "nanocomposite" is used for composite materials where the characteristic length scale of the dispersed phase is of the order of several nanometers (10-9 m). A nanocomposite material differs from a traditional composite (with dispersion length typically in the range of micrometers, 10-6 m) in that the numerical density of nanoparticles may be up to ~ 1020 cm-3; the interfacial area between nanoparticles and polymer matrix is enormous (up to ~ 107 cm2 /cm3); at the same time, distances between the dispersed nanoparticles and nanoparticle diameters are commensurate with the typical size of a polymer chain, measured e.g. by the root mean squared radius of gyration ⟨R_g ⟩^(1/2)~10 nm.It is generally accepted that the addition of nanoparticles (nanospheres, nanotubes, nanorods, nanoplatelets) in a polymer can lead to significant improvement in its properties. Despite intense research activity on polymeric matrix nanocomposites, however, the exact mechanisms by which nanoparticles affect the properties in often unexpected ways still remain largely unknown. The correct qualitative and quantitative description of relationships between the composition, the structure, and the final properties of the polymer nanocomposites remains a challenge. The two levels of hierarchical modeling developed here are interconnected in such a way as to afford a reliable prediction of structure – properties relationships of these systems. Two interconnected levels of representation and simulation were developed in this work for the polymer nanocomposites of atactic polystyrene – amorphous silica:Coarse-grained level, where polystyrene chains are represented as sequences of dyads, which interact with both bonded and nonbonded effective potentials. The coarse-grained potential of polystyrene is based on the Iterative Boltzmann Inversion (ΙΒΙ) method, applied on atomistic simulation trajectories of liquid oligomers of styrene. At the coarse-grained level, an amorphous silica nanoparticle is considered as a solid sphere, which interacts with the coarse-grained monomers of polystyrene through an integrated Hamaker potential obtained from elementary Lennard – Jones interactions between component atoms. The equilibration of melts is performed at the coarse-grained level using powerful connectivity-altering Monte Carlo (MC) techniques. Following equilibration, reconstruction of the atomistic detail is achieved, through a reverse mapping procedure which is based on combination of local ΜC moves and progressive minimization of the potential energy of the reconstructed configuration. Finally, the dynamics of neat and nanocomposite polystyrene systems is quantitatively characterized through Molecular Dynamics trajectories at the atomistic level of representation.United atom (UA) level, also referred to as atomistic level, where the amorphous silica nanoparticle is represented in full atomistic detail and the polymer chains are represented with realistic united-atom (UA) potentials of interaction. An amorphous silica nanoparticle (SiO2) is placed in matrix of atactic polystyrene (PS) with three-dimensional periodic boundary conditions. MD simulations provide detailed information on the local structure, the segmental dynamics at various positions relative to the nanoparticle, the thermodynamic and mechanical (elastic constants) properties. To summarize, the interaction energetics, molecular packing, entanglement network properties, segmental dynamics, and elastic constants of atactic polystyrene – amorphous silica nanocomposites, in the molten and the glassy state are studied via molecular simulations using these two interconnected levels of representation.Initial configurations for UA Molecular Dynamics (MD) simulations are obtained by reverse mapping well-equilibrated coarse-grained configurations. By analysing microcanonical UA MD trajectories, the polymer density profile is studied and the polymer is found to exhibit layering in the vicinity of the nanoparticle surface. An estimate of the enthalpy of mixing between polymer and nanoparticles, derived from the UA simulations, compares favourably against available experimental values. The dynamical behaviour of polystyrene (in neat and filled melt systems) is characterized in terms of bond orientation and dihedral angle time autocorrelation functions. At low concentration in the molten polymer matrix, silica nanoparticles are found to cause a slight deceleration of the segmental dynamics close to their surface compared to the bulk polymer. Well-equilibrated coarse-grained long-chain configurations are reduced to entanglement networks via topological analysis with the Contour Reduction Topological Analysis (CReTA) algorithm, yielding a slightly lower density of entanglements in the filled than in the neat systems. UA melt configurations are glassified by MD cooling. The elastic moduli of the resulting glassy nanocomposites are computed through an analysis of strain fluctuations in the undeformed state and through explicit mechanical deformation by MD, showing a stiffening of the polymer in the presence of nanoparticles. UA simulation results for the elastic constants are compared to continuum micromechanical calculations invoked in homogenization models of the overall mechanical behaviour of heterogeneous materials. They can be interpreted in terms of the presence of an “interphase” of approximate thickness 2nm around the nanoparticles, with elastic constants intermediate between those of filler and matrix.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Mathioudakis, Ioannis
- Μαθιουδάκης, Ιωάννης
Subjects
dc:subject × 15- Νανοσύνθετα πολυμερικά υλικά
- Ατομιστική προσομοίωση
- Αδροποιημένη προσομοίωση
- Πολυστυρένιο
- Πυριτία
- Νανοσωματίδια διοξειδίου πυριτίου
- Polymer nanocomposites
- Atomistic simulations
- Coarse-grained simulations
- Polystyrene
- Silica nanoparticles
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοτεχνολογία
- Engineering and Technology
- Nano-Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/40380