Back to search

National Technical University of Athens (NTUA)

Μοντελοποίηση τυρβώδους καύσης με τη μεθοδολογία της υπολογιστικής μηχανικής και εφαρμογή σε θέματα ασφάλειας τεχνολογιών υδρογόνου

Abstract

dc:description

The general framework of the Doctoral Thesis is the numerical modelling of gaseous fuels combustion, such as hydrogen combustion, in order to create a tool that can be used for safety assessment of accidents associated with the release of flammable gases in open and closed spaces. This tool will contribute to the design of the appropriate safety measures in order to minimize the consequences of an accident. Research on the use of hydrogen as an alternative fuel has been increased significantly over the past few years because hydrogen can contribute to the solution of the energy problem and to the mitigation of the climate change. It has high heat of combustion value per unit mass and it is an environmental friendly fuel because the only product of its combustion is water. Despite the many advantages that hydrogen presents as an energy carrier, it has the disadvantage of being a highly flammable gas with a wide range of flammability limits. As a result, in the case of an accident, hydrogen can escape to the atmosphere, mix with air and lead to a violent explosion (deflagration). Deflagration is a complex process because it involves a wide range of physical phenomena. The difficulty in its modelling lays in the fact that these phenomena occur at different spatial and temporal scales, which may vary in size between several orders of magnitude. Turbulence, which exists in most fluid mechanics problems, is a phenomenon of great complexity, and its interaction with combustion makes the study of explosion a complex task. In order to study and simulate the deflagration phenomenon, the Computational Fluid Dynamics (CFD) methodology is used. CFD is an attractive methodology of high accuracy which numerically solves the differential equations of fluid mechanics. The in-house CFD code ADREA-HF is utilized. ADREA-HF has been used successfully in the past in gas release and dispersion simulations in complex geometries. During this Thesis, ADREA-HF capabilities were extended so that it can simulate turbulent combustion, focusing on the deflagration modelling. The basic combustion model used and implemented in the code is a new and promising model that has been developed recently. Some of the objectives of this Thesis were to evaluate it, to identify its drawbacks and limits and to further develop it. This model takes into account most of the physical phenomena which occurs in the deflagration process and the parameters that control them. These are the chemistry, the turbulence existing in front of the flame front, the turbulence generated by the flame front itself, the thermal-diffusion instability and the fractal nature of the flame surface in large scale deflagrations. For turbulence, the Large Eddy Simulation (LES) method was mainly used which is considered as a very promising and accurate technique. The RANS (Reynolds-Averaged Navier-Stokes) method was also used and evaluated. Initially, before the study of complex scenarios of real interest, verification of the overall methodology was performed. One-dimensional deflagration in a semi-open channel and three-dimensional deflagration in a completely closed space were simulated. The theoretical solutions of these problems were accurately predicted. As a result, the verification of the methodology was successful. Then, three-dimensional simulations of deflagration experiments were conducted. For the complete evaluation of the methodology, the cases examined cover a wide range of spatial scales and phenomena. In all simulations, the effect on the results of various parameters of the combustion model was examined and the comparison of the LES and RANS methods were made. At first, deflagration simulation was performed in a small scale channel with obstacles. The modelling of the thermo-diffusive instability was evaluated and a new value of the critical radius of transition to the instability was proposed, which led to a better agreement with the experiment. Then, the methodology was evaluated against a large scale deflagration. One of the largest hydrogen deflagration experiments ever conducted was simulated for that purpose. The fractal sub-model was evaluated and different combustion models were examined. Deflagration in a model of tunnel was simulated next. Two scenarios were examined, one with a completely empty tunnel and one with obstacles inside it. In all simulations the agreement with the experiment was very good. The last simulation concerns the deflagration of homogeneous hydrogen-air mixture in a closed medium-scale enclosure with an opening (vented deflagration). Vented deflagrations are of great importance both from a practical point of view and because of the complexity of the phenomenon. External explosion which usually appears in this kind of deflagrations leads to a sharp increase in pressure and is difficult to be modelled. The combustion model predicted successfully the phenomenon until the point where the flame exits the opening, but failed to predict properly the external explosion. For this reason, two innovative modifications of the combustion model were developed and examined. The first modification concerns the way that the turbulent characteristic velocity is estimated. The new approach was applied for the first time in cases like the examined one and led to better agreement with the experiment. The second modification concerns the way that the modelling of the various phenomena contributes to the estimation of the turbulent burning velocity. This modification improved significantly the model’s predictions. The external explosion was successfully predicted, resulting in very good qualitatively and quantitatively agreement with the experiment. To sum up, the main purpose of the thesis, which was the development, implementation and evaluation of a mathematical combustion model, suitable for a wide range of deflagration cases, was fulfilled.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tolias, Ilias
  • Τόλιας, Ηλίας

Subjects

dc:subject × 16

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/41268

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tolias, Ilias; Τόλιας, Ηλίας. Μοντελοποίηση τυρβώδους καύσης με τη μεθοδολογία της υπολογιστικής μηχανικής και εφαρμογή σε θέματα ασφάλειας τεχνολογιών υδρογόνου. National Technical University of Athens (NTUA), 2017. http://hdl.handle.net/10442/hedi/41268