Back to search

National Technical University of Athens (NTUA)

Επεξεργασία και αξιοποίηση μηχανολογικών πολυμερών από απορρίμματα ηλεκτρικού και ηλεκτρονικού εξοπλισμού

Abstract

dc:description

The aim of the present thesis is the study of blends consisted of engineering polymers, which are found in the recycling stream of electrical and electronic equipment, and, moreover, the upgrading of their properties by the fabrication of polymer nanocomposites with montmorillonite and graphene. The preparation of the blends and the corresponding nanocomposites took place in a twin-screw extruder. In particular, the processing conditions, the rheological properties, the morphology and the thermomechanical properties of poly(acrylonitrile-butadiene-styrene)’s (ABS) blends with polycarbonate (PC) and polypropylene (PP) were investigated. The effect on the blends’ properties as well as on those of their nanocomposites produced by compatibilizers based on: i) ABS grafted with maleic anhydride (ABS-g-MAH) and ii) PP grafted with maleic anhydride (PP-g-MAH) was also examined.The blending of ABS with the polar PC leads to the improvement of the drawbacks which characterize each one of these polymers separately. Specifically, the ABS/PC blends can be processed at lower temperatures than those of pure PC and their extrusion becomes easier. Moreover, they present improved thermal stability and better mechanical performance in comparison with pure ABS. Also, the ABS/PC blends exhibit higher values of melt flow index (MFI), modulus of elasticity and storage modulus (Gʹ) compared to the pure components. The maximum synergistic action is recorded in the proportion 50/50 w/w and is probably attributed to the interactions which are developed between the PC phase and the SAN phase of ABS at this composition. The ABS/PC blends are characterized by partial miscibility, which permits the fairly uniform dispersion of PC particles in the ABS-rich blends, while chains with low molecular weight of one polymer emigrate in the phase of the other polymer. This emigration restricts the friction between the polymeric chains and facilitates their free movement. The existence of ABS-rich regions where PC chains are involved and vice versa, was quantified by the application of Fox’s equation in the experimental results of glass transition temperature (Tg), which was estimated by the dynamic mechanical analysis (DMA).Regarding the effect of addition of ABS-g-MAH to the ABS/PC systems, it decreases the values of MFI, due to a possible chemical reaction between the anhydride groups of ABS-g-MAH and the hydroxyl end groups of PC. Furthermore, the addition of ABS-g-MAH to the ABS/PC blends has as a consequence the completion of their thermal degradation at lower temperatures and in one stage at all the investigated proportions. Also, the addition of ABS-g-MAH reduces the modulus of elasticity of ABS/PC blends and the storage modulus of PC-rich, ABS/PC blends.In the nanocomposites of ABS/PC blends, two structures were observed by X-ray diffraction analysis (XRD): mixed intercalated/exfoliated and microcomposite structure. The second one is formed at much lower percentage and is ascribed to the degradation of surfactant on the clay or to its transfer from the clay to the matrix or/and to the change of the surrounding tension during the melt exfoliation.Regarding the effect of the incorporation of organically modified clay to the ABS/PC blends, a decrease of MFI values and significant increase of modulus of elasticity and storage modulus is observed, as well as an increase of loss modulus of SAN phase of ABS, because of the restriction of mobility of the polymeric chains by the clay nanoplatelets, the interactions between the organic modification of clay and the polar groups of polymeric components and the better miscibility between the ABS and PC achieved by the incorporation of organoclay. In addition, the incorporation of organoclay to the PC-rich, ABS/PC blends affects the mechanism of their thermal degradation, which is analyzed in two steps in the reinforced blends. The organically modified montmorillonite hinders the thermal degradation of PC phase, due to the formation of a protective layer in the ABS/PC interface or due to the creation of new paths of the degradation reaction, as a result of the “labyrinth” and “barrier” effects caused by the nanoplatelets. The improved thermal stability causes an increase of their char residue and a decrease of their gross calorific value.The combined addition of ABS-g-MAH and organoclay to the ABS/PC blends improves the exfoliation of polymeric chains between the organoclay nanoplatelets and facilitates the opening of clay galleries, as the microcomposite structure, which corresponds to low percentage in the nanocomposites of non-compatibilized blends, is absent after the addition of ABS-g-MAH. This behavior is attributed to some interactions between the hydroxyl groups of organic modification of reinforcement filler and the anhydride groups of compatibilizer. The incorporation of clay in the compatibilized, PC-rich, ABS/PC blends results in the thermal degradation taking place in two stages and the thermal degradation of PC phase being completed at higher temperatures compared to those of pure blends, but at lower temperatures compared to those of non-compatibilized, reinforced blends. Moreover, the incorporation of clay nanoplatelets to ABS-rich compatibilized blends improves the modulus of elasticity, which, however, remains lower than that of non-compatibilized nanocomposites. The combined addition of ABS-g-MAH and clay increases, also, the storage modulus of ABS/PC blends, which is lower than that of the non-compatibilized nanocomposites.The incorporation of graphene nanoplatelets to the non-compatibilized and compatibilized ABS/PC blends decreases their onset degradation temperature and maximum rate degradation temperature, at all the investigated proportions and mainly at pure PC, whereas an upward trend is observed for the char residue. The graphene, also has a favorable effect on the thermal degradation mechanism of PC-rich, ABS/PC blends and mainly on that of PC-phase, as the thermal degradation is completed at higher temperatures, in both non-compatibilized and compatibilized blends. Therefore, the graphene sheets contribute to the thermal stability of these blends, due to their increased thermal stability and their special, planar morphology, which permits to them to act as a barrier to the mass transport of volatiles produced during the thermal degradation, while they restricts\ at the same time the movement of polymeric chains which extended nearby. The graphene has a positive effect on the modulus of elasticity of 30/70 w/w ABS/PC blend.Then, the study of ABS was expanded to its hybrid systems with the non-polar PP. During the processing of blends, it was observed that the addition of PP to ABS improves its processability, whereas it makes feasible its extrusion at lower temperatures and decreases the torque during extrusion. The ABS/PP blends present MFI values and tensile strength similar to those of pure PP, because of the lack of miscibility between their components. Despite the lack of miscibility, the dispersion of ABS particles in the continuous PP phase is relatively uniform. The trend of PP to form the continuous phase, even in the ABS-rich blends, is attributed to its lower viscosity.Furthermore, the addition of PP to ABS improves its thermal stability. It is remarkable that the 30/70 w/w ABS/PP blends show higher maximum rate degradation temperature (Tpeak), which is higher even than that of pure PP.As reported in the related literature, the addition of ABS affects the non-isothermal crystallization of PP. In particular, an increase of β-PP phase content is recorded, which obtains the highest value at 30 wt% ABS concentration. Further increase of ABS content in the blend causes the formation of large ABS domains which hinder the β-PP crystallization. In addition, the ABS accelerates the isothermal crystallization of PP, as observed mathematically by the significant increase of constant K of Avrami’s equation and by the decrease of t1/2. Also, it enhances the modulus of elasticity, which increases as the ABS loading in the blend increases.The incorporation of organically modified montmorillonite in the ABS/PP blends causes a decrease of MFI values of the ABS-rich blends, due to the better chemical affinity with ABS in comparison with PP. Moreover, it improves the miscibility between ABS and PP, as it reduces the average size of the dispersed phase. The better chemical affinity of clay with ABS is confirmed by XRD analysis. In accordance with this analysis, microcomposite structure is formed in pure PP, whereas in ABS/PP blends two types of structures are achieved: mixed intercalated/exfoliated structure and microcomposite structure at lower percentage. Furthermore, in ABS/PP blends higher dispersion is noted by increasing the PP content, due to the decrease of viscosity caused by its addition. The decrease in viscosity facilitates the movement of polymeric chains and the opening up mechanisms of clay galleries.Also, the incorporation of montmorillonite nanoplatelets in PP-rich, ABS/PP blends results in the completion of their thermal degradation at slightly higher temperatures and in the increasing trend of limiting oxygen index (LOI).In addition, the incorporation of clay nanoplatelets to pure PP increases the percentage of β-PP phase and slightly accelerates its isothermal crystallization, causing doubling of K constant of Avrami’s equation and a slightly decrease of t1/2. This reveals their action as heterogeneous nucleating agents. However, the addition of clay in ABS/PP blends reduces the β-PP content and retards the isothermal crystallization of PP phase, maybe due to the effective dispersion of nanoplatelets in the polymeric matrix, promoted by the presence of polar ABS and the interactions between them. These interactions constrain the action of clay particles as heterogeneous nucleating agents of PP. The improved dispersion of clay platelets in ABS/PP blends has as a consequence their action as an impediment in the diffusion of PP chains, which tend to be organized in crystals.Moreover, the incorporation of clay to ABS/PP blends greatly improves the modulus of elasticity and the storage modulus at all studied proportions, except for that of pure PP, due to the lack of polarity and the non-effective dispersion of nanoplatelets.The combined addition of compatibilizer and clay to ABS/PP blends decreases the flow rate to a higher extent than the predictable based on the blend’s composition, maybe due to chemical interactions between the organic modification of montmorillonite and the anhydride group of compatibilizer. The simultaneous incorporation of PP-g-MAH and clay leads to the highest improvement of miscibility between the components of ABS/PP blend. Also, the addition of compatibilizers facilitates the opening of nanoplatelets in PP-rich, ABS/PP blends and mainly in pure PP, due to the introduction of the polar anhydride groups. This behavior has as a consequence the compatibilized nanocomposites of PP to present higher modulus of elasticity than that of non-compatibilized. However, in the compatibilized ABS/PP blends, the increase of modulus of elasticity caused by the incorporation of clay is lower than the corresponding of non-compatibilized blends. Also, the combined addition of compatibilizer and reinforcing filler increases the storage modulus during the dynamic mechanical analysis in torsion of ABS/PP blends.The results from the upgrading of ABS/PP blend, and mainly of pure PP, with the incorporation of graphene are of particular interest. Specifically, the thermal stability of pure PP is improved and the non-isothermal crystallization is accelerated, due to the action of graphene particles as heterogeneous nucleating agents for the α-PP phase. The isothermal crystallization of pure PP is also greatly accelerated with the addition of graphene, as shown by the increase of K constant of Avrami’s equation by two orders of magnitude and by the reduction of t1/2. Furthermore, the incorporation of graphene’s nanoplatelets increases its tensile strength and significantly improves its modulus of elasticity. The enhancement of the properties of reinforced PP is attributed to the intermolecular CH-π interactions between the i-PP and the graphene.In ABS/PP blends, the graphene does not present a compatibilizing effect, as it increases the size of dispersed ABS phase in the continuous PP phase. However, the favorable effect of graphene in these blends consists of the increase of char residue during their thermal degradation and in the great increase of modulus of elasticity. The dispersion of graphene nanoplatelets protects the adjacent PP chains and restricts their movement. Moreover, the non-isothermal crystallization of their PP-phase is accelerated but to a lower extent in comparison with that of pure PP. During the isothermal crystallization of PP phase of the reinforced with graphene blends, the existence of ABS causes its slight delay compared to that of graphene/PP nanocomposite. From the application of Avrami’s equation, it is found that the addition of 30 wt% ABS to graphene/PP nanocomposite causes reduction K constant by one order of magnitude and doubling of t1/2. It is worth noting that the incorporation of graphene nanoplatelets in ABS/PP induces increasing trend of the dielectric constant without increase of dielectric loss modulus.In conclusion, the nanoparticles of organically modified clay and graphene upgrade the thermal stability of PC-phase and PP-phase in their respective blends with ABS and offer significant improvement in their modulus of elasticity. The different effect on the crystallization of PP and the hindrance by the graphene in the development of β-PP form in its blends with ABS affects accordingly the properties which depend on this morphological feature. By studying the conditions of processing, it is concluded that graphene is appropriate for the preparation of ABS blends with polymers with high melting temperatures, whereas the organoclay is more effective in ABS blends with polymers characterized by lower processing temperatures.The investigated engineering polymers (ABS, PC and PP), as well as their blends, represent a category of thermoplastics polymers with widespread and high added value use in the field of electrical and electronic applications. The upgrading of their properties with the addition of reinforcing fillers with nano- dimensions has already shown interesting results. The originality of the research which was carried out as part of the present thesis lies in the following: The effect of incorporation of organically modified clay on the processing conditions (extrusion, injection), structure, morphology and thermomechanical properties of ABS/PP blends was examined. The literature is very poor regarding this topic and the present thesis contributes to the enlargement of knowledge on this field. The incorporation of graphene to ABS/PC and ABS/PP blends was studied and its effect on their processing conditions (extrusion), as well as on their thermomechanical properties was investigated. The compatibilizing effect of organoclay on ABS/PC and ABS/PP blends was revealed. Comparison between the effects on ABS/PC and ABS/PP blends of conventional compatibilizers and their combined addition with mineral reinforcing nanofillers was carried out and the appropriate concentrations for optimal synergy of the components of the prepared polyblends were specified. Mathematical models were applied to fit the results of thermogravimetric analysis of ABS/PC blends and a physical model which describes the mechanism of their thermal degradation was proposed. The energy exploitation of ABS/PC and ABS/PP blends and their nanocomposites, with recovery of thermal energy through burning was examined and it was associated with the proposed mechanism of thermal degradation. The effect of the ABS, alone and in combination with organoclay or graphene, on non-isothermal and isothermal crystallization of PP was investigated and a kinetic study of the latter was carried out. Moreover, the effect of the above factors on β-crystal form of PP was studied.The originality of these points of the thesis is demonstrated by the fact that the results have been published in international scientific journals and presented in refereed conferences.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Triantou, Marianna
  • Τριάντου, Μαριάννα

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/41624

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Triantou, Marianna; Τριάντου, Μαριάννα. Επεξεργασία και αξιοποίηση μηχανολογικών πολυμερών από απορρίμματα ηλεκτρικού και ηλεκτρονικού εξοπλισμού. National Technical University of Athens (NTUA), 2015. http://hdl.handle.net/10442/hedi/41624