Back to search

National Technical University of Athens (NTUA)

Μελέτη μεθόδων διαμετατροπής των ιξωδοελαστικών συναρτήσεων σε ευρεία κλίμακα χρόνων και συχνοτήτων

Abstract

dc:description

This thesis deals with the study of the fundamental functions that characterize the viscoelastic behavior of materials, as well as the relations connecting them, through the presentation of various methods of interconversion, and the evaluation of the results produced by each one of them. For this purpose, the available experimental data of a number of materials of a wide range of polymeric systems were utilized. At first, a presentation of the basic viscoelastic phenomena and the quantities that characterize them is made, while at the same time the respective constitutive relations are extracted, as well as those relations that correlate the fundamental viscoelastic functions. Special mention is made to the effect of temperature and the dependence of viscoelastic functions on it, as well as the principle of time-temperature equivalence, based on which it is possible to construct the curves of the basic viscoelastic functions for a wide range of time or frequency, without the need for complex and long-term experiments. Then a reference is made to the various models that have been developed in order to approach both relaxation and creep, starting with the simplest (Maxwell and Kelvin models) concluding to the generalized Maxwell and Kelvin models, which are the basic tools for the mechanical representation of the above phenomena through the expression of relaxation modulus and creep compliance functions as Prony series. In addition, the theory of fractional derivatives, as well as the respective Maxwell and Kelvin fractional models were presented, together with their generalized form by analogy to the classical Maxwell and Kelvin models, which can describe the basic viscoelastic functions with a significantly smaller number of parameters. Going forward, the various methods of interconversion procedure of the basic viscoelastic functions are presented. According to the first interconversion method analyzed, the generalized Maxwell and Kelvin models along with Prony series have been used in order to fit the experimental data of relaxation modulus or creep compliance, while the final function of creep compliance or relaxation modulus, respectively, results from the relationship between the two basic viscoelastic functions. Furthermore, five different conversion methods are presented. The first two of them use the Prony series and the generalized Maxwell and Kelvin models for fitting and interconverting the storage and loss modulus experimental data, while the other three rely on pure mathematical models such as the sigmoidal function, the stretched-exponential function and a simple large degree polynomial function. A key element of all these methods is the calculation of the storage and loss compliance with the aid of the correlation between the complex relaxation modulus and the complex creep compliance. Proceeding, the interconversion process by means of the Fractional Models, such as the generalized fractional Maxwell and Kelvin and the fractional Zener is analyzed. In this case also, the experimental data of dynamic moduli is used for the fitting procedure. At the same time, a correction factor is introduced in the calculation of the creep compliance function, which is defined by the ratio of the creep compliance experimental equilibrium value to the corresponding theoretic value calculated by the integral relation described in Ferry (1980), which presupposes the clear demarcation of the equilibrium regions of the experimental data of the materials under consideration. Finally, an interconversion method is developed, which is related with a time-dependent constitutive equation, which arises from the time evolution of polymeric junctions which rearrange upon the imposition of a stress-field. To perform these rearrangements, they need to overcome an energy barrier which follow a distribution. In the following analysis one uses two such function: a Gaussian distribution function with zero mean value and a distribution function resulting from the normalizing process of the experimental data of the loss modulus. For the evaluation of the effectiveness of the presented interconversion methods, experimental data of various polymeric materials such as Polymethyl Methacrylate (PMMA), Ecovio ® LBX 8145 (EC), the polymer PMMA with a cross - linking degree of 1%, supplemented by a well-known biodegradable polymer produced from natural resources, named polylactic Acid (PLA), were used. The final conclusion is that the use of different models (mechanical or purely mathematical), in combination with the process of interconversion of basic viscoelastic functions, can describe the viscoelastic behavior of polymeric materials quite satisfactorily, regardless of the method used. The method that will ultimately be chosen depends on the material that is examined each time and the quality of the available experimental data, as well as on the simplicity of the calculations offered by each one of them.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Katsourinis, Stylianos
  • Κατσουρίνης, Στυλιανός

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/49248

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Katsourinis, Stylianos; Κατσουρίνης, Στυλιανός. Μελέτη μεθόδων διαμετατροπής των ιξωδοελαστικών συναρτήσεων σε ευρεία κλίμακα χρόνων και συχνοτήτων. National Technical University of Athens (NTUA), 2021. http://hdl.handle.net/10442/hedi/49248